Does anyone have experience configuring one of these babies. I been sitting at this pc a good ole 3 hours trying to figure out how to factory reset it. If anyone has some time to help me out shoot me a message just bought it a few days ago so new to the whole setup.
Cisco Nexus 3064
- Thread starter ELit3
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
You need to use Ctrl ] during the initial boot cycle in order to get into Romon mode, then change the Administrator password from there. Then use the Write Erase command from the CLI when you do get in. Look for Cisco Nexus password recovery on the Cisco site for more info 
whole procedure is on : Password Recovery Procedure for Cisco NX-OS - Password Recovery Procedure for Cisco NX-OS [Support]
sometime CRTL ] is not working, try CTRL C
sometime CRTL ] is not working, try CTRL C