Got mine yesterday, packed ok but not great. (The middle wasn't supported, so the screws that hold the front ~8" onto the rest of the chassis had loosened up.
Notes:
1: It is an intel s2600gz; the bios was password protected and I have updated the bios/bmc/etc to newest, except didn't get to the Intel/LSI latest yet.
2: I haven't yet gotten into the raid configuration; the SAS drive was configured as a virtual drive(degraded, of course), and it started booting into a unix environment. Last boot ~1000 days ago. I then wiped the virtual drive configuration, since I decided I didn't care what was on it.
System hangs when I try to get into webbios, but I can get into the preboot cli. Hopefully updating the LSI firmware fixes this.
3: Did have the q-logic 2564 fiber channel card, I pulled for now as it is a slow booting card.
4: I haven't gotten into the Intel web BMC yet, I can setup a user but login fails, although I can login via IPMI. Again, haven't had a chance to play with this.
5: It does have the LSI/Intel Raid card, but no BBU or raid key.
6: The intel LSI firmware revision is the same as the LSI 9265CV I have in another server, so should support JBOD.
7: One power cord included, no bezel, and the rack ears are not standard. Looks like intel rails are $25, so...
8: The power supplies are 80+ platinum supplies.
9: Much quieter than my 1u 2x 2x 5440 supermicro twin box, except at boot.