C6100, H310, can't install OS to SSD?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
F

frogtech

Well-Known Member
Jan 4, 2016
1,482
272
83
35
Maybe I made a mistake by creating a RAID 0 on a lone SSD with a 9260-8i and then going back after the fact, but I'm having a problem where I can't install Server 2012 to an Intel S3500 I have plugged into the C6100. It is connected via an H310 which is flashed to IT mode. I've never had an issue with this card before so I'm wondering if it's a C6100 problem. Is there some trick I'm supposed to do in the BIOS or backplane jumper?

I keep getting the "Windows cannot be installed to disk 0 partition 1". I've deleted the drives formatting and done diskpart stuff over and over.
 
markarr

markarr

Active Member
Oct 31, 2013
421
122
43
Is there any usb device plugged in outside of keyboard and the install media? I have found if you have another usb stick plugged in outside of the install stick you get those errors. If not then you may need to either clean the disk with diskpart or run dban on it.
 
F

frogtech

Well-Known Member
Jan 4, 2016
1,482
272
83
35
Just the usb stick install media and the keyboard are plugged in. Ive done a disk part clean but no go. I'll do an active killdisk maybe.

Sent from my LG-H811 using Tapatalk
 
You must log in or register to reply here.
Top Bottom