oops, missed that. they reportedly do all support 10gb though, so I assume that parts a typo, like the ppl immediately after that post also think?*cough*
oops, missed that. they reportedly do all support 10gb though, so I assume that parts a typo, like the ppl immediately after that post also think?*cough*
I can totally recommend this seller. I ordered 6x 6450-24P, all full working in almost perfect cosmetic condition, including rack ears.I ordered a Brocade ICX6450-24P from eBay. Asking price is 140 GBP. I made an offer that was accepted, there are 4 more available as of now: Brocade ICX6450-24P 24-Port Gig PoE Switch + 4 X SFP Ports (2 are SFP+ Ports) | eBay
Cheers.
... stock configuration / interfaces / etc ...
router ospf
ospf router-id 10.255.255.13 <-- Set this to a loopback address on the local box
redistribute kernel !<-- This is the magic...but you MUST use a distribute-list + access-list or bad things will happen
network 192.168.2.0/24 area 1.1.1.1 !<-- if you don't have another area, set this to area 0... set this to the network where you share an interface with your router
distribute-list calico out kernel !<-- tells it to use the calico filter below to only redistribute routes from the calico subnets
!
access-list calico permit 10.244.0.0/16 !<-- this is my Cluster's CIDR
access-list calico permit 10.96.0.0/12 !<-- this is the Services CIDR, though I currently don't distribute this to BGP
access-list calico permit 10.255.255.13/32 !<-- this is a local loopback address
access-list calico deny any
network:
ethernets:
lo:
addresses: [10.255.255.13/32]
router ospf
area 0
area z (whatever you set your area to above...)
interface ve xxx (the ve on the VLAN from the ospfd.conf file above)
ip ospf area z
did you follow fohdeesha guide from the first post? ICX6430 / ICX6450 - Fohdeesha Docs I just got my 6610 and could not been any easier to get it updated and running. my web interface works
did you follow fohdeesha guide from the first post? ICX6430 / ICX6450 - Fohdeesha Docs I just got my 6610 and could not been any easier to get it updated and running. my web interface works
Same question for me as well, but in the US.Can anyone provide links to SFP+ transceivers at a low price?
Can anyone provide links to SFP+ transceivers at a low price? The best I've found so far is: Cooper 30 m SFP+ Transceiver: Brocade 10G-SFPP-T
Also, what do I miss without the optical monitoring and would all these 'brocade compatible' transceivers miss that?
UBOOT: BE Mode
VENENO2 48 Copper (Non-POE), PVT1
SYS CPLD VER: 0x6, Released Ver: 0
I2C Read Failure, i 0 [ret 0x1], addr 0x52, muxdata 0x0, bus 0, len 11
EEPROM is not TLV format or CRC32 error.
I2C Read Failure, i 0 [ret 0x1], addr 0x52, muxdata 0x0, bus 0, len 11
I2C Read Failure, i 0 [ret 0x1], addr 0x52, muxdata 0x0, bus 0, len 10
Signature mismatch Writing Shmoo values into flash .....
SF: Got idcodes
00000000: c2 20 17 c2 20 . ..
et0: gmac_serdes_init() PLL ready brought up exit
SF: Got idcodes
00000000: c2 20 17 c2 20 . ..
========== relocate address: 0xdfd1c000, offset 0xc1d1c000 ==========
Hit any key to stop autoboot: 0
DIABLO>
Yeah, copper rj45 ones seems to triple the price at least!I just bought some Fiber ones and a 150' fiber cable for my test setup, SFP module's that are 10G were 30$ each, but you want copper right ?
1PCS Brocade 10GE SR 57-0000075-01 10GSFPP-SR 850nm MMF Price Each Transceiver | eBayCan anyone provide links to SFP+ transceivers at a low price? The best I've found so far is: Cooper 30 m SFP+ Transceiver: Brocade 10G-SFPP-T
Also, what do I miss without the optical monitoring and would all these 'brocade compatible' transceivers miss that?
1PCS Brocade 10GE SR 57-0000075-01 10GSFPP-SR 850nm MMF Price Each Transceiver | eBay
$10 each, authentic brocade sfp+.
What about this one? https://www.servethehome.com/mikrotik-srj10-review-convert-sfp-to-10gbase-t-inexpensively/Yeah, copper rj45 ones seems to triple the price at least!
But not RJ45 or am I missing something? These are -SR and I think I need -T?1PCS Brocade 10GE SR 57-0000075-01 10GSFPP-SR 850nm MMF Price Each Transceiver | eBay
$10 each, authentic brocade sfp+.