BL465C G7 - out of chassis ethernet?

[madLyfe]

not sure if this is the correct forum for this but for those of you who know about the BL465C G7, what would be the best way to go about getting it ethernet outside of a c7000/c3000 chassis?

 

[Evan]

How fast ?
There is an internal USB2 port you could use...

 

[madLyfe]

How fast ?
There is an internal USB2 port you could use...

only really needs to be 10/100. i was planning on using that for USB key ubuntu server. not sure if that port can be multiplied?

 

[Evan]

Or USB using the SUV cable at the front, not sure if that works but may do...

 

[madLyfe]

Or USB using the SUV cable at the front, not sure if that works but may do...

what about multiplying that port? also, what kind of ethernet connection dongle would work with the server if i have to go the USB route? not sure ive seen one.

edit:
something like this?
USB 3.0 Ethernet Adapter to 10/100/1000 Mbps Gigabit RJ45 LAN Network Adapter | eBay
or even this combo:
3 Ports USB 3.0 Gigabit Ethernet Lan RJ45 Network Adapter Hub to 1000Mbps Mac PC | eBay

i found this in the docs. not sure if this disqualifies it from being used as ethernet?

 

[Evan]

Honestly don't know, can try it, I only have gen8/gen9 Intel blades around so don't think anything I could check would make sense.