Aruba VLAN/routing help!

Discussion in 'Networking' started by gregsachs, Nov 18, 2019.

  1. gregsachs

    gregsachs Active Member

    Joined:
    Aug 14, 2018
    Messages:
    220
    Likes Received:
    42
    Have an Aruba s2500, and having issues getting routing working.
    Basic configuration:
    Firewall is 192.168.15.1, connected to s2500 on port 0 and 192.168.15.2 IP address. Port 0 is set as uplink/untagged.
    I've got vlans 98 and 99 defined as 192.168.98.x and 192.168.99.x, both 255.255.255.0, with the switch set as .1 on each vlan.
    I have the internal s2500 dhcp server working on both vlans, and if I connect a vm network adapter tagged with 98 or 99 to the trunked switch port I can pull an appropriate .99.x or .98.x ip address.
    What I haven't managed to do is define the routes from the vlans to the gateway.
    I've tried in the routing config to declare 192.168.98.x /255.255.255.0 nexthop 192.168.15.1, but that doesn't work.
    I'm sure I'm missing something stupid, but it is kicking my butt...
    Thanks!
     
    #1
  2. petree77

    petree77 New Member

    Joined:
    Mar 10, 2015
    Messages:
    9
    Likes Received:
    0
    Did you declare routes on your firewall back to the aruba for vlans 98 and 99?
     
    #2
  3. gregsachs

    gregsachs Active Member

    Joined:
    Aug 14, 2018
    Messages:
    220
    Likes Received:
    42
    And that was the missing step I needed, thanks! I think I want to move the firewall and uplink from the aruba to a different subnet, to keep the traffic in the aruba, but that can wait.
     
    #3
Similar Threads: Aruba VLAN/routing
Forum Title Date
Networking Brocade ICX6450-24P vs Aruba S2500-24P for Homelab Sep 22, 2019
Networking Aruba 2540 experiences? Feb 6, 2019
Networking Help Decide - Cisco C3750x, C2960S, Aruba S3500, Juniper EX2200 Sep 27, 2018
Networking SFP+ DAC showing as 1000base-CX (Aruba S2500, Brocade BR1020) Dec 27, 2017
Networking Aruba Networks S2500 / S3500 SFP+ Compatibility Dec 26, 2014

Share This Page