Anyone know what cables go in this?

[Dreece]

It is the HPE NVME bridge controller, supports 6 NVME drives when connected to the appropriate HPE NVME cage.

Cable part number(s) would be greatly appreciated

Aha, its the same thing as the doublewide sas cables they use for their raid cards.

That black connector on the card, is that just to annoy you or does that have to be connected up too? and if so, I wonder what cable goes in that?

Google isn't being very friendly in this adventure.

 

[BeTeP]

Depending on the server model (i.e. backplane used) there are different cables. The simplest one is
New HP 822780-001 Proliant DL380 Gen9 6-SFF Mini SAS Cable 826898-001 | eBay

 

[tomaash]

HPE PartSurfer

I don't think black connector is required, at least there's no obvious place on the 6-bay cage to connect it to.
Google isn't finding any installation manual for that kit.

 

[Dreece]

Depending on the server model (i.e. backplane used) there are different cables. The simplest one is
New HP 822780-001 Proliant DL380 Gen9 6-SFF Mini SAS Cable 826898-001 | eBay

For a while I was beginning to think I need to buy the full nvme kit just to get the cables, thankfully not.

So 3 of these should do the trick to link up to the NVME backplane. Great! Thank you @BeTeP