Is there a bios setting for the power alarm? I am getting an alarm that seems to be from the power supply monitor. Same alarm I get if I only have power on one supply in other SM systems.
My config is custom/bizzare. I replaced the dying Intel S5520HC motherboard in the Intel chassis with a X9DR3-F. I can see power supply status through IPMIVIEW for both supplies. Everything is good, but during boot I get the alarm. Once booted it is quiet. I thought it was because I only had one supply but installing the second supply and powering it did not change anything. I don’t want to remove the buzzer as I have seen in another post
My config is custom/bizzare. I replaced the dying Intel S5520HC motherboard in the Intel chassis with a X9DR3-F. I can see power supply status through IPMIVIEW for both supplies. Everything is good, but during boot I get the alarm. Once booted it is quiet. I thought it was because I only had one supply but installing the second supply and powering it did not change anything. I don’t want to remove the buzzer as I have seen in another post
Last edited: