So now that I have my Intel 750 issues solved...I need to figure out the proper settings for using my 9265 with a single drive. I'm out of Intel SATA 6 ports on my motherboard. I have two option...use the 9265 with a single drive or use the Marvell controller on my board that gives me additional SATA 6 ports. I would prefer the 9265 as it is supported natively by ESXi. The Marvell is not. And eventually I want to run this drive as a datastore.
So I have the drive connected. The problem is that write performance is crap. I have the exact same drive connected to an Intel port and its great. So I'm assuming I just don't know how to properly configure this drive on the 9265. So what are the proper settings for a single drive RAID 0 SSD on a 9265???
So I have the drive connected. The problem is that write performance is crap. I have the exact same drive connected to an Intel port and its great. So I'm assuming I just don't know how to properly configure this drive on the 9265. So what are the proper settings for a single drive RAID 0 SSD on a 9265???