No post due to ES CPU? I found a BIOS that is supposed to make it work, but the issue is that I don't know the IPMI password. I checked what's on the motherboard, and it's incorrect. What are my options? The easiest way is to get another cheap CPU, like the 7251 or 7261, to make it post and reset the IPMI password. The second and much harder task is flashing the BIOS chip with ch341. Is there anything else that I should try?
0
- Thread starter JUGS
- Start date
Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
for linux
[Guide] How to Use a CH341A SPI Programmer/Flasher (with Pictures!)
If you’re worried about flashing your motherboard with an SPI Programmer, then this is the guide for you. Each step is explained in detail, with pictures. We’ll go over everything, from buying your Programmer to flashing your chip with Flashrom. As per usual, this is a tutorial on the internet...
winraid.level1techs.com
Are you sure that it needs a SOIC8 clamp? h11DSI rev 2.0 BIOS chip seems to have more pins if I'm not mistaken.
Attachments
close to the BMC chip is the BMC FW. locate the BIOS chip, or the BMC if this is the BIOS
mx25l25635 is used by SM for BMC flash, and SM uses MX25L25635FMI-10G for BIOS
Last edited:
I found another chip that says MXIC MX25L25673GM2I-10G I assume that this is the BIOS chip.close to the BMC chip is the BMC FW. locate the BIOS chip, or the BMC if this is the BIOS
mx25l25635 is used by SM for BMC flash, and SM uses MX25L25635FMI-10G for BIOS
I found the modified BIOS 39.25 MB file on MEGA h11dsi rev 2.0 and I will be uploading that to the chip, I already read the old BIOS and have it saved just in case, anything I'm missing?