Except for the VGA, I think the mb works. I have cleared the BIOS, tried different CPUs, different memory, different vga monitors and cables.
The MB boots and the fans scream. I get one beep and then in about 60 seconds the fans slow down.
I checked the VGA jumper (JPG1) and no matter which...
TLDR: If I plug in 3 Noctua industrial fans for PWM, none will spin up. If I plug in any two of them (or 2 + a rando fan), all will will work fine.
I recently got a (new to me) X9DRi-LN4F+ SuperMicro motherboard inside SC846E16 4U chassis.
After researching the best way to quiet it, I...
I have a strange issue with my X9DRi-LN4F+ as you can see in the video bellow
Nothing on the screen
removed all memory - beep changed to the correct sequence when you don't have memory
removed CPU power - same beep as in the video
Power supply: Zalman ZM1000-GVM -...
I've tried to price as fair as possibly, via perusing the deals threads and looking at current ebay offerings in addition to completed ebay sales.
Should you feel as though a price may be too high, etc., please don't hesitate to PM me to let me know so I can review and action...
I'm looking at this server, which may be a good buy?
Supermicro X9DRi-LN4F+ - E5-2600 2U (Configure to Order)
It uses the Supermicro X9DRi-LN4F+ motherboard version v1.2. I'd be using 2x E5-2680 v2. Up to 512GB DDR3 RDIMM 1886 MHz.
There have been posts on here citing...
I am currently in the making of a server upgrade, current machine dual x5650 96gb ram running Unraid server.
Parts that i already have. Dual E5-2690v1 , 12x8GB eec rdimm. LSI 9207-8i HBA. 16x300gb SAS 2.5 drives. INTEL 910 400gb ssd. Quad intel 1000vt nic-card.
New server will run...
I have 24 DDR3 1333 ECC RDIMMs i'm planningto use with such a board, but according to https://www.supermicro.com/manuals/motherboard/C606_602/MNL-1258.pdf the speed will go down to 1066Mhz if i choose ti use 3DPC.
Am i understandingt the manual right?
I really need those 192GB of RAM. I'd have...