x11sat-f

Hello, I updated the BIOS of Supermicro X11SAT-F motherboard using the IPMI webpage and followed that by updating the IPMI firmware. After these operations my original mac address was wiped and replaced it with, System LAN1 MAC address : 88:88:88:88:87:88 Both BIOS and IPMI fine. The BIOS...

Hello, I have a X11SAT-F motherboard with IPMI support running linux under EFI mode. I want to use SOL for the remote server. I appended the kernel command line to the following, linux /@/vmlinuz-4.9.95-gentoo root=ZFS=rpool/ROOT/gentoo ro spl.spl_hostid=0xa8c06f01 console=tty0...

Hello, I would like to use the IPMI remote console and discrete graphics on Supermicro X11SAT-F motherboard simultaneously. The discrete graphics will be used normally while IPMI will come in handy for remote fixing. The Intel processor has support for IGFX and there is a Nvidia card in a PCIe...

Hi, I am trying to use Hauppauge HVR-2200 card in a X11SAT-F motherboard. Unfortunately, the system is not detecting the card. lspci doesnt show the card. The card is working on another system, and shows 02:00.0 Multimedia controller: Philips Semiconductors SAA7164 (rev 81)...

Does anyone else here have the Supermicro X11SAT-F? If so would you please respond and lets discuss what we need to do to get Supermicro off their butts and get this board certified for TB3. I've asked Supermicro multiple time over the past year when the certification will be completed, but they...