x10

  1. A

    [SOLD] Supermicro CSE-847 36-bay chassis, SAS3+4x NVME, 1k28w SQ PSU, X10DRH-CT mb, 2x E5-2640V4 CPUs (20/40 cores), 256gb ECC DDR4, & more

    Proof: I present to you, the beast! I am downsizing with my 2nd child on the way. This has been lightly used in a homelab environment, running 24/7 for the past ~2 years. The noise is surprisingly good with this having all aftermarket fans and quiet PSU. Still gets good static pressure. I had...
  2. mattlach

    *SOLD* Real Life Stuff For Sale / Trade FS: 12x 10TB 7200rpm Seagate Enterprise (Exos) 10TB Drives ~40k Hours Logged

    For sale are the drives listed in the table below. They will come in one fancy box courtesy of Seagate (they actually sent me this box with only one drive in it) Full SMART output and picture of each drive are attached at the bottom. Drive History: 1.) Drives were bought new by me over a...
  3. P

    Supermicro x10 Server Reading Power Consumption in IPMI?

    Hey guys I have a home server with the following specs below and have issues reading the power consumption of this thing: - supermicro SAS833TQ 3U chassis - supermicro x10-DRL-i motherboard - one E5 2630L v3 CPU - 2 x 16gb RDIMMs - 4 Drives Red WD (2 8tb and 2 4tb) - IT mode flashed Dell LSI...
  4. Layla

    Create Custom Fan Speed Maps for SuperMicro X10 Servers via IPMI

    I got tired of the noise with my SuperMicro X10 Server (4027GR-TRT), but didn't want to get into involved hardware fan swaps which still may produce unsatisfactory results. For reference, the "Optimal" fan setting decided to run half of the fans at 8000RPM at idle, and the other half at 5000RPM...
  5. C

    Supermicro X10SRH-CLN4F Memory Issue

    Found an issue that is puzzling me and figured I'd see if anyone had any thoughts on it. I'm running BIOS 2.0a and have a E5-2630 v4. According to the MB manual (https://www.supermicro.com/manuals/motherboard/C612/MNL-1577.pdf) on page 2-15 it shows that it should support 2400 mhz memory...