pci-e

  1. B

    [Solved ]Supermicro X9DBU-iF and 10G PCI-e NIC detection

    Case was solved by adding a second CPU. --- Hi, I own a Supermicro X9DBU-iF board (up-to-date BMC/BIOS) with a rsc-r1uu-ue16 riser. I am trying to make it detect an Intel XL710-BM1 Quad-Port 10G SFP+ PCIe 3.0 x8 NIC and/or an Intel 82599ES Dual-Port 10G SFP+ PCIe 2.0 x8 (up to date firmware)...
  2. svtkobra7

    SMCI X9 Bifurcation I Why some boards but not all ?

    I don't mean to beat a dead horse as this topic has been much discussed (190 search results), but it seems as though there is not a definitive answer as to the question: Do SMCI X9 motherboards support bifurcation? Answers to that question run the gamut: (1) "Hell Yeah," (2) "Only on days that...
  3. I

    [New Find] JEYI JMS585 - PCIe to 5x M.2 SATA3 Adaptor

    Just thought I'd share a new piece of tech I found while doing my weekly browse on AliExpress. I was quite intrigued when I found a PCIe to 5x M.2 SATA3 adaptor for $59.00. Link: US $59.0 |JEYI JMS585 X16 PCIE 5 m. 2 SATA expansion card turn PCIE3.0 SATA RAID array card 5*ssd 5*ngff 5*m.2...
  4. TheBloke

    Conflict between LSI in PCI-E 1.1 x4 slot and onboard SATA2 ports

    Hi all Firstly, this is possibly a motherboard problem so it might belong in the mobo forum; but my symptoms relate only to disks and HBAs, so I hope it's OK being here. I have a Tyan S7012 motherboard, LGA1366 chipset. This motherboard has 4 x PCI-E 2.0 x8 slots and 1 x PCI-E 1.1 x4 slot...
  5. TheBloke

    Powering a PCI-E SAS expander without a PCI-E slot? Theoretically possible to make an adapter?

    Hi all I'm thinking of adding at least one SAS expander to my setup, as I am currently using 4 x LSI cards - and therefore 4 x PCI-E 2.0 slots - to run 28 x 2TB SATA3 drives. I know that I can put more drives on fewer cards without losing performance, but as I have a low-profile case I can't...
Top Bottom