fusion-io

I've been trying to figure this out for years now. I've finally registered here as most of the information I can find about these drives online all point back to here. Forgive me for immediately jumping to a request for help. I have a Fusion-io ioScale 3.2TB, product number...

I'm selling a 3.2TB barely used Sandisk SX350. Current vsl-iomemory4 drivers are available from Snuf's GitHub repository. Got it running in Debian (Proxmox), Gentoo and even Arch Linux. The cards are traded on eBay for >500EUR even with high usage. Due to its very low usage, I'm asking for 399...

I'm looking for up to 5x low-profile (short) brackets for Fusion-io/Sandisk cards.

I bought a brand new SanDisk ioMemory 3.2TB SX350 on eBay recently for less than 350EUR and had the chance to work with and test it for some time now as storage for VM's and databases. I'm totally happy, if not super happy, with the performance and how it works out in Proxmox and I'm therefore...

Hello folks, For the past several weeks, snuf and I have been working on porting the original iomemory-vsl4 driver (4.3.7.1205) to the Linux 5.x Kernels. We've tested it with 5.3, 5.4 and 5.6 so far, and under Proxmox 6.1 with the 5.3 Kernel. We just pushed out a working release tonight and are...

Not really a bargain. This seller has sold 3.2Tb version few weeks ago. Endurance was in between 75 - 99.5% He did mention in email price of 350, and week later offered €525. Now on ebay, price is 450 SDFADCMOS-6T40-SF1 I've got 2 drives from them (3.2Tb), both was 77%. I did ordered 1 drive...

I was bought Sandisk iomemory PX600 2.6TB @ $90 on ebay. then I was installed VSL 4.3.6 on windows 10, ioMemory is running in a minimal state cuz unsupported firmware version. So, I was update firmware with 4.3.6 .fff archive. no force option, everything was fine. but after reboot, I've...

Long time lurker however I have an issue I haven't been able to find a solution for. Bit of a long shot but here goes... Trying to install a PCI IOFX 420GB SSD card and hit a roadblock. Updated to latest version of VSL driver and IOFX firmware I could find and they just don't talk. In cmd...

Selling a used Fusion IoScale2 1.65TB SSD with relatively low usage. Looking to get $320 for it. Continuous Read: 1.4GB/s Continuous Write: 1.1GB/s PCI-Express Gen 2.0 x4 The drive still has over 75% of its life left, 1.9PB written (rated to write 8 petabytes, see 2nd picture in the link...

Hey there, everyone! I purchased a Dell R810 earlier this year as my first foray into making a homelab. Recently, I was offered a rather attractive deal on an MD1200 with 7x2TB WD Re drives, dual PSUs and controllers, an associated HBA, cables, and - most importantly - a Fusion-IO Duo 640GB...

Fusion ioFX PCI-e2.0x4 1.6TB SSD Brand:Fusion-iO Model: ioFX 1.6TB SSD Interface: PCI-e 2.0x4 Flash type: MLC NAND Flash Capacity: 1.6TB Performance: Read Bandwidth(1MB) : 1.4GB/s Write Bandwidth(1MB) : 1.1GB/s Use for: Mac Pro 2008 2009 2010; HP WorkStation...

Trying to update the firmware on a Fusion-io / Sandisk SX300 1.6TB that is a HP and here is what I get: Running fio-status: C:\>fio-status Found 1 VSL driver package: 4.2.5 build 1266 Driver: loaded Found 1 ioMemory device in this system Adapter: ioMono (driver 4.2.5) HP 1.6TB...

Starting a thread on the Fusion-io ioDrive 2 1.2TB cards as they seem to be on the market fairly often now at under $0.50/GB. Hopefully others can chime in with experiences. Key Specs Capacity: 1.2TB Formatted capacity in Windows: ~1.1TB Random 4k read IOPS (tested via Iometer): 330K - 340K...