Search results

I did it using nano. It works, thanks

It works for me. I made a mistake. I entered this command echo 1 > /sys/block/sda/device/delete and then without reboot this command @reboot root /usr/bin/echo 1 > /sys/block/sda/device/delete 2>&1

OK. Is that command correct? I have this message: root@delta:~# @reboot root /usr/bin/echo 1 > /sys/block/sda/device/delete 2>&1 -bash: /sys/block/sda/device/delete: No such file or directory @reboot root /usr/bin/echo 1 > /sys/block/sda/device/delete 2>&1

sorry for bad english, google translate helps me... do you mean this cable? the other thing is that you use zfs on cheap consumer ssds. this will cause 2 things. .................. Does this apply to zfs, zfs raid 1? Or does it apply to other filesystems as well? I have one disk with...

Very nice. Thanks for sharing. I have a question. How did you connect the 2x intel ssd disks to the topton?

Thanks for the comprehensive answer. I blocked the sd card and I have 1-2% less. I have only two vms - pfsense and hassio. I still had high I/O. I only put one nvme drive in there. I/O is below 1%. Can he ask about your configuration? Topton, Cwwk? What discs do you have?

Sorry for bad english. Hello. I have a Topton device where I have two nvme drives ( 2x Samsung 980 500GB ). One is connected normally and the other via an adapter to the wifi module. I have a zfs raid 1 filesystem. I have very high I/O. More than 8%. And the temperatures of the disks are 60 C...

Thank you very much for your answer.

Hello. (I don't speak English, a translator helps me.) I live in the EU - the Czech Republic (next to Germany) . I bought this unit - Core i5-1235U https://www.aliexpress.com/item/1005005346499671.html I have two questions. This is the original source. 1) what is the best source...