Search results

YES!:):):) Reinstalled with W2008R2, and then installed FastTrack drivers, and voila, my old partition showed up, nice as always:) Thanks a lot for your help:)

problem is that I'm unable to boot to CTLR+F without disabling the motherboard raid controller. Anyway, I went into detail, and windows had the opportunity to bring them online again. I therefore desided that this was probably OK, and started installation of windows on the mirror RAID. I'll let...

I'll loaded setup from cd, and then loaded drivers for the promise controller. Then it shows up, but have 0mb free space, and is also marked as Offline. Any idea what that actual mean?

Right, that's a good idea. This really gives me the opportunity to verify that my RAID5 is OK before doing any changes. Thanks a lot, I'll try that first of all:)

Well, nothing has changed to the RAID5, neither disks or controller. I will install win28K on the motherboards mirror raid, and then install drivers for the promise after I have installed windows. I do not need access to the Promise RAID5 during setup, as the installation of windows is purly on...

Well, actual, I have to disable the motherboard RAID controller in order to be able to hit CTRL-F and control the Promise controller. But, I supppose that this should not be neccessary anyway, since the promise RAID should be OK, and should really not be touched. I guess it would be OK just to...

ok, thanks for your information. I'm still worried, cause the bios already controls the raid controller that is integrated on the motherboard. When the server starts up, I only have the option do configure the RAID that controls the mirror, and this RAID controller is integrated with the...

Hi, I have a win2008 server with 2 raidsets on. 1 which is a mirror and hosts the OS, and one which hosts a data partition. This data partition is a RAID5 with promise fasttrack TX4310 controller. My issue is that my mirror is gone, and I will have to reinstall windows. I plan to install...