I am searching m.2 (2280 or 22110) nvme enterprise ssd in good status (like sk hynix 6011 or samsung pm983). Capacity must be 1.92TB or similar. I can evaluate also pcie slot ssd but drive should run cool (it will run in a case without so much airflow). Max 150 euro :)
thanx in advance
Hello, I am searching ddr4 ecc udimm ram (frequency is not important, but it should be compatible with Asrock X470D4U)…possibily sticks (2 or 4) of 16 or 32 gb…and at low price :)
Thanx in advance!
Hello, I want to buy a closed rack cabinet for installing a Supermicro 826 chassis (I think 800 mm deep should be enough)... height should be from 8U to 25U (but it's best if it is very low in height, because I will install only 2U server, a patch panel, a multi-socket for energy and a switch...
Hello, I am interested on 4tb sata ssd for a bartop project...I accept low speed ssd and also with lot of TBW...the most important thing is a low price. Thanx in advance
ok thank you for the info...I would install a pci fan bracket (for doing a cleanly job)...but what? horizontal (like this https://www.amazon.com/GeLid-SL-PCI-02-Slot-120mm-Cooler/dp/B00OXHOQVU) or side ( like this PCI Side-blown Graphics card cooling fan mount bracket 714046424316 | eBay)? in...
hello, recently I bought an Intel P4608 6.4 Tb nvme pciex ssd (because it was a low low price)...I installed in a Fractal R5 case (my personal Freenas server with x10sra-f supermicro motherboard, 64 gb of ram, 8x8TB Wd red and Xeon 2697a v4). But I’m little worried about ssd temperature (it’s...
Very thanx to NathanA...I follow all the steps (using a Live of Ubuntu) for my X520-DA2 and I changed (in my case) “fc” value to “fd”. Now I can use non-Intel transceiver (I use Fs ones). Thanx again
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.