Okay thanks for the input. Found out after searching the Intel storage matrix raid will only see a 2tb partition so i made a raid vol 0 with 1tb and a vol 2 with 4tb and was able to install server 2016 on it and seems to be working fine
Okay tried as the suggestions here when i made even a 500 gig partition it made the whole raid GPT why not sure but it still gives me the same thing as per pic in other post i did. i did make a raid 5 with 3 drives left the zero drive out of it and with 1.8TB i was able to install server 2016...
Just standard no other raid controller I have not loaded any drivers when the windows comes up and shows hard drive in the server setup it does show the raid 5.68 or so Tb but if I select it it splits it into 2 unallocatied spaces
I have a dell C1100 CS24-ty With a updated bios from dell with the bmc update everything is working fine But now i just bought 4 x 2TB drives to do a raid 5 with a total of 5.58 TB (I think) when i get everything setup and boot to server 2016 64bit and get to where is shows my drive it wont let...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.