Search results

  1. L

    [FS] Sonnet 10GE Thunderbolt 3 NIC/adapter $150

    Item Photo.... Selling a perfect condition Sonnet 10GE / Thunderbolt network adapter. I finally got around to buying a switch with 10GE ports so this becomes redundant. I've had this working under Ubuntu, Windows10, and the Mac forums are littered with people using it for media editing...
  2. L

    FS - Solo10G Thunderbolt3 10GBASE-T w/ multi-gig support

    Selling one of these guys: lightly used, works perfectly. I've interop'ed this with three or four different NICs/switches on the other end, it works as expected at 2.5, 5, and 10G. Asking $125, shipped domestic US... https://www.sonnetstore.com/products/solo-10g
  3. L

    FS: 6x HGST 2TB 3.5" 7200RPM SATA 6.0Gb/s $180

    I outgrew this set in my home array, so looking for a good home. These were purchased online maybe mid-2016 and have been happily spinning in my home server since then. All drives passed SMART check, and a full 4-pass (~24 hour) badblocks run. a zipfile with smartctl and hdparm output for...
  4. L

    FS: Supermicro X10SRL-F motherboard $200

    Gently used, updated to current IPMI/BIOS. $200 plus shipping. Supermicro | Products | Motherboards | Xeon® Boards | X10SRL-F
  5. L

    FS: HP EX920 1TB SSD - $120: basically new: less than 4TB drive writes so far

    Selling a barely used 1TB HP920EX SSD. I bought this ~6mo ago to get my "old" work laptop through it's last little bit of lease time, and just got a refresh with its own 1TB so this one gets to find a good home. It's been lightly used, the SMART data reports between 3-4 TB of data written, so...
  6. L

    $15: Almost free to good home! 2xNZXT 120mm 3-pin fans, 1xKingwin 140mm 3-pin fan

    new case, new fans, so these get to find somewhere to live. all 3-pin variants, pulled from my old system, all run smoothly with no rattles or vibration or anything like that. 2x NZXT 120mm 3-pin 1x Kingwin 140mm 3-pin. $10 for all three (I just want them to get used somewhere rather than...
  7. L

    SOLD: Supermicro X9SRA, e5-2630L v2, 32GB DDR3 ECC, Radeon 4350 512MB

    It's a fileserver in a box - just add power and drives! Somewhat seriously: I upgraded my home VM/lab machine recently so I'm selling the guts of the old one. Components (with links): CPU: Intel E5-2630L v2 CPU. 6 core / 12 thread. Memory: (qty 8) 4GB Micron PC3-10600 ECC DRAM. 32GB...
  8. L

    REALLY "sluggish" video drawing on X10SRL-F via IPMI VGA

    I've put together a Linux/KVM system based around an X10SRL-F motherboard, and I'm stumped on what I can only describe as "extremely slow or sluggish video". What I mean by this is that when the system boots, the console messages that appear on the screen scroll excruciatingly slowly, and this...
  9. L

    FS: CoolerMaster Hyper 212 EVO $20

    Sigh. Turns out this particular model does NOT work with the 2011-3 Narrow ILM sockets: it only works with the square ones. So I have an unused one of these looking for a good home. I'm new here so happy to do a facetime or phone call or whatever before the sale to verify. Free ground/USPS...
  10. L

    drives not visible on SCU ports - Supermicro X9SRA

    I'm stumped here - I've got a supermicro X9SRA motherboard (2x 6gbps SATA + 4x 3gbps SATA on native board, then 4x 3gbps on the SCU) but for some reason I can't seem to reliably get drives to appear either in BIOS or in the OS (Ubuntu 16.04) when they're attached to the SCU. The drives are...
  11. L

    memory problem with X9SRA - won't post with >3 DIMMs, population doesn't match docs

    I picked up a used X9SRA to use as a home server. Plan was to put an E5-2630LV2, 32GB (8x4GB) DIMMs in there, memory modules are ECC Registered DDR3-1333 Micron modules. When I got it put together (all memory installed in all 8 slots) it wouldn't POST, so I started breadboarding the thing...