This: Nokia | 3HE14833AARA01 | 1063904601-12 | Transceiver Module | eBay is an OSA 5401 SyncPlug, perhaps something that not many people need, but I think they're neat (for $20 I'd buy pretty much any weird device in an SFP module.) Spec sheet is here: https://www.oscilloquartz.com/-/media/oscilloquartz/resources/data-sheets/pdfs/osa-5401.pdf
I just received mine, and while it has pretty outdated SSH algorithms and ciphers, I was able to get in with the default IP, user, and password (found here:https://is5com.com/wp-content/uploads/2022/01/Application-Note_OSA-5401.pdf on page 5):
Once you're in you can change the root password with:
I haven't acquired an antenna yet, so I can't actually test it fully yet, but from the spec sheet it doesn't need anything unusual, just 3.3V and a SMA connector.
There are 7 left as of now.
Edit: After receiving the module it appears that they do not support NTP as indicated in the spec sheet, this requires an additional license, I haven't asked how much that would cost. This comment explains how to use the layer 2 PTP multicast to sync an ntpd with the module: https://forums.servethehome.com/index.php?threads/neat-gps-clock-sfp-module-20.43927/post-422562
I just received mine, and while it has pretty outdated SSH algorithms and ciphers, I was able to get in with the default IP, user, and password (found here:https://is5com.com/wp-content/uploads/2022/01/Application-Note_OSA-5401.pdf on page 5):
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -oHostkeyAlgorithms=+ssh-rsa,ssh-dss -oCiphers=+aes256-cbc root@192.168.0.2
Once you're in you can change the root password with:
configure management ssh-user change-pw root
I haven't acquired an antenna yet, so I can't actually test it fully yet, but from the spec sheet it doesn't need anything unusual, just 3.3V and a SMA connector.
There are 7 left as of now.
Edit: After receiving the module it appears that they do not support NTP as indicated in the spec sheet, this requires an additional license, I haven't asked how much that would cost. This comment explains how to use the layer 2 PTP multicast to sync an ntpd with the module: https://forums.servethehome.com/index.php?threads/neat-gps-clock-sfp-module-20.43927/post-422562
Last edited: