I spotted this at $669 - one left
Intel SSD DC P3605 Series SSDPEDME016T4S 1.6TB NVMe PCIe 3 MLC IFDPC5EA3ORC1.6T | eBay
Intel SSD DC P3605 Series SSDPEDME016T4S 1.6TB NVMe PCIe 3 MLC IFDPC5EA3ORC1.6T | eBay
You gave me s good example. I will try in red hat.On Ubuntu
Code:sudo apt-get update sudo apt-get upgrade sudo apt-get install nvme-cli sudo nvme list sudo nvme fw-download /dev/nvme__ --fw='/__/8DV1RA11.bin' sudo nvme fw-activate /dev/nvme__ --action=1 sudo nvme reset /dev/nvme__ sudo nvme list sudo nvme fw-download /dev/nvme__ --fw='/__/8DV1RA13.bin' sudo nvme fw-activate /dev/nvme__ --action=1 sudo nvme reset /dev/nvme__
wooh tempting.... but no budget left this month hehe10+ available at $589 with BO available: Sun Oracle 1.6TB Flash Accelerator F160 Card Intel SSD DC P3605 Series NVME PCIe | eBay
I snagged one last time and have overkill on my home gaming machine. I just might pick up another...
with which seller? there are a few ebay listings mentioned in this thread...Update: My opening bid of $480 was accepted last night. Might be some room below that, even. Approaching $0.25 per gig for enterprise SSD? Yes please!
Probably the one he linked to in #45. Wish I saw his post earlier, could've saved $20, offered same seller $500 and was accepted.with which seller? there are a few ebay listings mentioned in this thread...
Here are P3600 vs P3605 1.6TB in official specsThese P3605 have lower spec than P3600:
Intel® SSD DC P3600 Series (1.6TB, 1/2 Height PCIe 3.0, 20nm, MLC) Product Specifications
http://www.oracle.com/us/products/servers/f160datasheet-2900793.pdf
Is that right?
Do you know if the PCI bracket is pretty standard spacing and can be swapped out with say one from an LSI card? I need a full height bracket on it, and I have some left overs from LSI cards I can use if they can fit...Received the one I ordered from the seller linked in post #45 yesterday and slapped it into a Supermicro X10 motherboard it had no issues with seeing the drive, FreeNAS was able to access it as well. AFAIK there's no NVMe support in smartctl on FreeNAS so I wasn't able to check SMART values.
Yes, the spacing is standard so any full height bracket with ~54mm spaced holes will work.Do you know if the PCI bracket is pretty standard spacing and can be swapped out with say one from an LSI card? I need a full height bracket on it, and I have some left overs from LSI cards I can use if they can fit...