vcth4nh's latest activity
-
Vvcth4nh replied to the thread ESXi 7.0 System sensor display "No sensor" on Supermicro X10DAi board.Haha really? I can't find the IPMI in the manual, so does that mean it isn't supported? So, is there any way I can read the sensor data?
-
Vvcth4nh posted the thread ESXi 7.0 System sensor display "No sensor" on Supermicro X10DAi board in VMware, VirtualBox, Citrix.Have anyone experienced this problem? "This system has no IPMI capabilities, you may need to install a driver to enable sensor data to...
-
-
Vvcth4nh replied to the thread [SOLVE] ESXI 7.0U3: Passthrough Supermicro X10 onboard sata controller to TrueNas VM?.THIS ACTUALLY HELP!
-
VI'm not positive on the C610 chipset, but, as ehfortin mentioned in his thread, you'll need to add the Wellsburg controller to...
-
Vvcth4nh posted the thread [SOLVE] ESXI 7.0U3: Passthrough Supermicro X10 onboard sata controller to TrueNas VM? in VMware, VirtualBox, Citrix.Spec: Supermicro X10Dai motherboard SSD1 (boot SSD) connects to Sata port 9, SSD2 connect to Sata port 3 I read the manual, and I...
-
-
Vvcth4nh replied to the thread Tagged vlan for motherboard ethernet port and ESXi.Interesting, I’ve nerver heard of Distributed Virtual Switch. Definitely will look into that.
-
Vvcth4nh replied to the thread Tagged vlan for motherboard ethernet port and ESXi.Nvm, I was just really dumb. I misconfigured the VLAN trunk to 99 on my switch o_O
-
-
Vvcth4nh replied to the thread Tagged vlan for motherboard ethernet port and ESXi.Seems like I did the same thing (?), can you check my screenshot? I don't know if I misconfig something in the switch or the ESXi
-
Vvcth4nh replied to the thread Tagged vlan for motherboard ethernet port and ESXi.Do you mean this? ESXi doesn't allow me to choose the vmnic0, which is used for switch0
-
-
VRouter switch: Edgerouter X SFP Mobo: Supermicro x10 DAi Os: ESXi My ESXi server will run 2 types of VM: VM for public and VM for...
-
-
Vvcth4nh replied to the thread Need help with redesigning my home network.Haha thanks! I'll definitely look into Ubiquiti gears! Really appreciate the diagram suggestion.
-
Vvcth4nh reacted to NerdAshes's post in the thread Need help with redesigning my home network with
Like.
Here is what I would do.. Using Ubiquiti UniFi gear since there is a TON of help and videos to set it all up. Dream Router UDR... -
Vvcth4nh replied to the thread Need help with redesigning my home network.Sorry, in total it should be around $300 to $350. The price and the concept of cheap/expensive are different from country to country, so...
-
VYou must really like consumer-grade wifi routers. I'd go with mesh-like network, such as Omada, or Aruba IAP (my setup) and some...
-
Vvcth4nh reacted to NerdAshes's post in the thread Need help with redesigning my home network with Like.
A lot to unpack here... I'll start with your 3 goals. 1. Segregate devices into 3 VLANs: Main Devices (TVs, PCs, phones, server), IoT...
