Recent content by vangoose

  1. V

    SRX300 Firmware

    There is no fix for that yet, this is the only workaround at the moment.
  2. V

    SRX300 Firmware

    As long as you don't expose web admin page to internet you are fine. Basically limit remote management to local IPs.
  3. V

    Do you take this seat?

    There is not enough competition in Canada, Air Canada sucks and either is Westjet. I got 4 hours delay and they refused to pay compensation because one pilot was absent and they said it's safety reason.
  4. V

    ESXI 7.0.3 - NVMe (Asus Hyper) passthrough stuck on enabled/needs reboot

    I haven't touched my lab for a while, couple days ago I updated my ESXi from 7.0.3b to 7.0.3u and passthrough for 970 pro stopped working. Here is the devices passthrough that still works.
  5. V

    Fibre or copper for NAS access

    Lol, 1 or 2 ports is going to make significant difference, nope. Do whatever you want for couple ports unless you plan for whole business or data center.
  6. V

    Replace SRX 300 Internal eUSB

    My SRX 300's internal eUSB failed, here are the steps I took to replace it. I didn't backup to external USB, had to restart from scratch, I did have backup of the config though. 1. The system boots into boot loader, you can install from tftp in boot prompt, needs to run set ip and netmask...
  7. V

    Hardware Failures in 2022 - Post yours!

    Just got eUSB failed on my SRX, lol. Took me a while to figure out hot to re-install on external USB. My backup config wasn't up to date, now have to reconfigure it again. lol.
  8. V

    Looking for a recommendation of a 22110 (or 2280) that is cool to the touch

    Seagate FireCuda 530 is very cool and fast, it also has twice the durability.
  9. V

    Noob question on L3 switch routing

    I have the same design as you, my DMZ/VPN are routed and segmented by SRX, internal networks are routed by Arista, there are vrf and bgp between Arista and SRX. People need to think networks as zones and design from there.
  10. V

    SRX300 Firmware

    https://rapidgator.net/file/468c00aeec0c7c40710c001898ea4f98/junos-arm-32-21.4R3.15.tgz.html From download page, can't find newer.
  11. V

    SRX300 Firmware

    Another update? lol https://rapidgator.net/file/2074bd67e6a54d867593eb3dc15daafa/junos-srxsme-21.4R3-S3.4.tgz.html
  12. V

    SRX300 Firmware

    FYI. They only publish checksum for release versions. You won't find checksum for patches, no point for me to provide that checksum.
  13. V

    SRX300 Firmware

    Here is the download page, you can select 19.4. I'll upload the version here so you can check checksum since you only use it for upgrade. Downloads (juniper.net) https://rapidgator.net/file/91ebaf6a2eeb98e8d2ec53d01d304ca8/junos-srxsme-19.4R3.11.tgz.html Here is the latest Junos Software...