Recent content by Screedo

TQ modell have invidual connections per drive, I want SFF-8643 connection on the bakplan. I now see I wrote SAS2 in the headline, I will change it as it's a SAS3 bakplan I want to replace it with.

This server will have 2x Netapp DS4246 chassi connected so i'm only searching for the server. It's only used Supermicro parts which are hard to find in my country. spareparts etc I can buy on ebay, but buying a used chassi on ebay I have to pay around $300 for shipment plus import tax.

Hi, Thanks for your answer, been searching alot about this but have not found anything. Guess I have to continue looking for a SC826 chassi, unfortunately Supermicro are not common chassis on the used market in my country. Best regards Patrik

I’m going to replace my old Truenas server with a rackserver I have found this server for sale. Supermicro SC825 E3-1270 v5 16GB 8x3TB 1xNvme M.2 2xPSU Rails Chassi: SC825 Motherboard: Supermicro X11SSH-F Bakplan: BPN-SAS3-825TQ CPU: Intel Xeon E3-1270 V5 3.60ghz 4 core 8 Threads RAM: 16gb...

Hi all, I currently have an HP DL380G7 which is equipped with two Xeon X5675 CPUs and 147GB RAM and runs ESXi 6.0.0, 3620759 as a hypervisor. I have two Netapp DS4246 chassis connected to an LSI 9286CV-8e and running a hardware raid. I do not find this driver / vib to be able to install this...

Hi mrkrad! With a crossflashed M1015 card, from the guide here, http://www.servethehome.com/ibm-serveraid-m1015-part-4/ ,will M1015 get same spec as the LSI 9211 8i? I have read about the M1015 being a OEM version to the LSI 9211 8i card. If so then I can fill upp my Norco 20 bay chassi with...

Hello! I'm kinda stealing this post some, hope it's OK. I have the same raid controller IBM ServerRaid M1015, flashed to sas2008 in IT mode and my question is how many hdd's can you connect to this card flashed with sas 2008 firmware? With original firmware you can connect up to 16...