After reading accidentally an article about retired E5-2670, I built a system with dual Xeon 2670 + S2600cp + P4308XXMFGN
I added a cooler master blade master 92mm PWM fan at the rear end, powered by system fan 7 4-pin header , it spins but can not see the rpm thru HWinfo or IASC. After adding...
after adding "OTHER_REAR_FAN" in master.cfg, the fan is seen on HWinfo or IASC, but the rpm is not right. Does anybody know how to modify the "OTHER_REAR_FAN" portion of SDR to report the right rpm?
Looks like need to modify master.cfg as follows, then modify "OTHER_REAR_FAN" in S2600CP.sdr, am I right? since the built-in OTHER_REAR_FAN is for high spin fan
//Set SDR tags for items that are standard on specific SKU *******************************
//...
Thanks for your response!
I did re-run FRUSDR many times after adding the rear fan, SDR part runs automatically due to detected Intel chassis, did not ask which fan is on, which is off. The fan spins so should be active but can not find RPM report. any clue? Do I need to add fan 7 manually in...
I have S2600cp in P4308XXMFGN, I added a 92mm PWM fan at the rear end, powered by system fan 7 4-pin header , it spins but can not see the speed thru HWinfo or IASC, is it right?
just noted that the chassis sold on ebay
Intel P4308XXMFGN Server Chassis 4U 750W. New Bulk Packaging
is debadged, without Intel logo like other Intel chassis. wonder is it a legal product?
- used in good condition
- Drive Bays: 3.5" Hot-swap x4 (including power cable/4 sata cables), Internal 2.5" x2 , Slim ODD x1
- PSU: 550 watts, dual CPU capable for eATX board
- Cooling Fans Middle: 4 x 40mm (T=48mm), PWM + 1 x 40mm non-PWM
- front panel: USB x 2, HD/Power/NIC Led, Power...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.