Recent content by mirrormax

Already explained it to you and apologized but if you wanna twist it into something its not sure go ahead. It got bought out on a local listing (buy it now) type deal while we were figuring out logistics. We hadnt figured out shipping or payment yet.

Not sure tbh, but most likely. theres no amd documentation on this but acording to chatgpt:

yes seen them listed as QS, they are unlocked, and even overclockable so you can run them faster than retail if you want, they share microcode with retail as well so no compatibility issues, and they have retail stepping B0. Ran them in both supermicro and gigabyte systems, and others on this...

Model QTY Price notes AMD EPYC 7742 2 750€ each unlocked 2ghz-3.2ghz (100-000000053-04) RAM: Samsung 16GB DDR4-3200 RDIMM ECC 16 30€ each M393A2K43DB3-CWE Micron 32GB DDR4-3200 RDIMM ECC 8 sold MTA18ASF4G72PDZ-3G2B2TI 32GB DDR4-3200 CL22 Dual Rank x8 ECC NVME: Huawei...

had this made after issues with hot enterprise nvmes in workstations. this helps with both mounting and airflow for me, most cases these days have no or little airflow over the disks which is fine except for these high end heaters! in case anyone else have ran into the same issue...

This whole thread is about the overclocking tool for these ES/QS cpus. so yes to have it run faster you need to use the OC tool found in this thread, theres both a windows and linux version(linux one abit finickier to use) you wont damage the cpu by setting tdps higher, there are limits in the...

theres a few different settings to play around with, a lot of it documented here https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/tuning-guides/2019-amd-epyc-7002-tg-bios-workload-56745_0_80.pdf also depending on cooling, VRM temps are gonna be the limiting factor, if its in...

the solutions above should work fine had to do that myself in the past. iam surprised they havnt fixed this yet and added fan curves like other vendors have even on their server boards. curious how the QS cpu is running, max clocks single core and all core? iam considering the same cpu for my...

epyc cpus especially the 7742 run really cool, unless you have really inadequate cooling the vrm will more likely overheat before the cpus themselves.

there are exceptions, i have a samsung 1735 u.3 drive that specifically says u.3 only, and dosnt work with my u.2 cables or in the dock. btw its annoying that all these docks suddenly doubled in price. they where are around 200$ before. i guess they couldnt produce them fast enough for the demand.

ive had issues connecting to the bmc from the same pc someotimes, works fine from another one pc, i think it runs it over the same eth port depending on your setup/cabling. the temp looks like an error, these cpus usually run pretty cool, fan curve in bmc is good though i would just adjust it to...

nice work, maybe upload the modded fw if anyone needs it in the future

i would try with zenstates-rome for linux and see if you can look up the values first to see if it uses the same commands. theres an --smu-test-message command to test sending smu commands https://forums.servethehome.com/index.php?attachments/zenstates-rome-es-zip.14971/

Never seen that, try update BMC maybe. What happens on boot, does fan spin up? Do you see cpu and memory in inventory? And are you getting sensor temps etc?

hows the cpuz single core score on these?