Recent content by MESSERCHMIDT

There is an hp one everyone used, but it runs hot

You need the model up for 10gbe

https://slickdeals.net/f/16964419-asustor-flashstor-6-fs6706t-6-bay-all-sdd-nas-storage-6x-2tb-solidigm-p41-plus-m-2-2280-pcie-4-0-nvme-gen-4-ssd-780-free-shipping?src=foryou_recombee&prop=rcmid-8a9828640b424e6b7f35014cb50da68f

Hmm never considered the used enterprise grade stuff

Hello. I have a 12400 with 32gb of ram that is going to be my new home server. Need a set of nvme ssds to run proxmox and some images off it. Was looking at the new 1tb wd blue sn580s, or 10$ more for the sn770s. Or should I get something else?

Anything wifi6(e) is sufficient. Make sure it does 160mhz.

Got it for 113$ cdn, about 84$ usd with the promo

for an opnsense box. Wanted to flash in main pc 1st

hello. purchased an hp 523sfp+ dual 10gbe card. any suggestions on what firmware to use for 2.5gbe mode on opnsense? also, can it be updated in windows 11? looking here: HPE Support Center any guides/suggestions?

Go i225 v3 or 226

You might have to flash it to 40gbe mode and use those drivers. The win10/11 connect x3 drivers are broken.

Need 4 or 5 sfp+ to rj45 adapters. I was going to go with of the the ones that servethehome.com reviewed. Going to be a bit expensive. I was wondering if anyone could suggest used rj45-sfp+ adapters that do 1/2.5/5/10? New cable service is 1.5gbs down, so had to do an upgrade. Bought a brocade...

do any of these units support 2.5 or 5gbs? or just 1gbs/10gbs? (and some 40gbs on the back) [specifically the Brocade ICX6610]

thanks!

these look legit? $22 and 10$ usd shipping to canada. need two as they are 4x (no more 16-8x slots available on these new systems) Mellanox ConnectX-3 MCX341 SFP+10Gigabit Ethernet RMDA/RoCE | eBay