Koop's latest activity
-
Koop replied to the thread [FS][US-NJ] RAM Modules , Intel Consumer CPUs.In housing or just by themselves? I could potentially use a few if they're the same models as the ones used in SuperMicro chassis -
Thanks for your help guys, the server is up and running. Ended up getting the card mentioned above. Thanks for everything. I'll be...
-
Koop replied to the thread Supermicro 846 chassis fully extended rails question.I'm gonna necro this thread since it's relevant to me. I noticed today using two sets of yellow rev B rails and two 846 chassis I cannot...
-
Koop reacted to wildpig1234's post in the thread Cheyenne supercomputer with 8,064 Xeon e5-2697v4 and 313,344GB of DDR4 auction! with
Like.
Personal Property Management System (gsaauctions.gov) Current bid is $101,000 for 8064 e5-2697 v4 (18C) cpus and 313,344GB 2400 DDR4... -
Koop reacted to nexox's post in the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs with Sad.
Yet I can barely ever find an existing model for my projects, in the rare case someone has made something close, it often needs enough...
-
Koop reacted to mirrormax's post in the thread 3d printable 2.5" nvme holder/funnel for mounting on 120mm fan holes with Wow.
had this made after issues with hot enterprise nvmes in workstations. this helps with both mounting and airflow for me, most cases these...
-
Koop replied to the thread Ebay - used HGST HC520 SATA 12tb with vendor 5 year warranty - $83 - sketchy vendor warning!.I've purchased 10TB drives from them and they didn't wipe SMART or anything like that. Clearly showed they had a ton of hours on them...
-
Koop replied to the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs.My midlife crisis isn't a car that's for sure.
-
Koop replied to the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs.Yeah I had gone down this route initially but for the number of things I wanted to print it started to become somewhat costly. To the...
-
Koop replied to the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs.Appreciate the advice. I only speak to models I see readily available online ready to print where right when I see it I wish I could...
-
Koop replied to the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs.This is seriously becoming more and more of a requirement / good idea for me. I really need to look into getting my own printer but I...
-
Koop replied to the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs.Appreciate the input. I am aware of all the requirements. It would be interesting to see a large adapter like this with some cooling...
-
Koop replied to the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs.Updated my post for what I'm currently seeking! :)
-
Koop replied to the thread Need info on what to get.I have used the same HBA with the same backplane without issue. Updating the firmware on the HBA is extremely easy and I would...
-
Koop reacted to mrpasc's post in the thread [US-NJ][WTB] x16 and x8 PCIe to U.2 adapters, HGST 800GB SAS SSDs with Like.
Sdparm might help to check if write cache enabled and what interface speed is set. Sometimes EMC sas drives are set to SAS2 even if the...