Recent content by iliak

  1. I

    dell m1000e Mezzanine compatibility issue

    I have a m1000e with some m820 and m620 that are working fine, each of them have the following network card configured to work on 10gb Ethernet 10 GbE XAUI Broadcom M57710 i am trying to add newer m630 blades . but every mazzine network card i try gives an error and the server does not...
  2. I

    Looking for recommendation for enterprise m2 sata ssd for boot

    what do you think about: https://www.ebay.com/itm/304054732349 any suggestion for good grade m.2 sata drive?
  3. I

    Looking for recommendation for enterprise m2 sata ssd for boot

    yes it is clustered, till now we used drives like this but they are starting to fail, (fortunately i have raid1 clone.. so i can replace the dead one) looking for something with more endurance for our next servers. all optane are nvme, looking for sata solution best i found so far is micron...
  4. I

    Looking for recommendation for enterprise m2 sata ssd for boot

    most of the 2.5' slots are used for storage , we have some free ram slots and i am thinking to use them with something like this and use the freed 2.5' for extra storage any suggestion for enterprise m2 ssd sata drives (i am also open for refurbished ) is 860 EVO SATA M.2 SSD a good option...
  5. I

    [WTB] 64ddr3 lrdimm( 60 units), small sata ssds, 2697v2

    contact me via PM if you want, i can give you a contacts very good reseller (quality and price) (of mostly used enterprise toys, he located in israel but work world wide)
  6. I

    [WTB] 64ddr3 lrdimm( 60 units), small sata ssds, 2697v2

    will be based on one of (units) still waiting for quote for them from local seller, 6027R-E1R12L 6027R-E1R12N 6027R-E1R12T each server back extension for 2*2.5 (to be used as boot drives) 2x 2697v2, 12x 64ddr3 1x connectx3 40gbx2 4-5x (10TB or more of 3.5') 15x 2.5 ssds are needed without...
  7. I

    [WTB] 64ddr3 lrdimm( 60 units), small sata ssds, 2697v2

    We are extending our cluster and need some hardware: * 60 units of 64GB ddr3 lrdimm (total of 3840GB, if the price is good we might buy more) * 15 units sata ssds (enterprise, 90% or better smart) 400GB or better ( not willing to pay extra for much larger drives, this is intended for boot drive)...
  8. I

    looking for 4x switch suggestion

    currently we have mix brand mode switches mostly cisco 3x2690G, 3132q (40GB), dell force10(10GB) we are out of 1G ports, and we in the process of ordering new(refurbished) switches we are thinking for ordering 4x3750x with 10GB module. (each cost around 300$ on ebay) I am thinking for going...
  9. I

    WTB 2.5" 15K Hard Drives & e5 V4 series dual CPU

    why do you chose hdd over ssd?
  10. I

    does X6557-R6 NETAPP 0.5M compatible as 40gb ethernet ?

    we plan to connect them between mellanox cx3 and 40gb qsfp eternet switch should it work ?
  11. I

    UK 4x Supermicro X9 Twin-node 2U servers. Seeking help on pricing for sale as lot-of-4.

    The network part is simple mellanox cx3 are just plug an play (some times i need to change the mode from 56 to 40GEthernet) My question regards the LSI UNRAID card, i searched the supermicro website and did not found what lsi cards work in this motherboard and what cable needed to connect...
  12. I

    UK 4x Supermicro X9 Twin-node 2U servers. Seeking help on pricing for sale as lot-of-4.

    i could not find information for compatible configuration to lsi in IT mode, what cards cables are needed to make it work
  13. I

    UK 4x Supermicro X9 Twin-node 2U servers. Seeking help on pricing for sale as lot-of-4.

    can it be extended to 10\40 gb network per node, and lsi unraid card?
  14. I

    MZ7WD960HMHP detects wrong size

    update: the drive is usable after security-erase and security-unlock, but wrong size is detected 880 instead of 960 gb cant make sg_format --resize to work
  15. I

    MZ7WD960HMHP detects wrong size

    trying .. no luck so far hdparm --user-master m --security-unlock tttttttttttttttttttttttttttttttt /dev/sda hdparm -I /dev/sda security_password: "tttttttttttttttttttttttttttttttt" /dev/sda: Issuing SECURITY_UNLOCK command, password="tttttttttttttttttttttttttttttttt", user=master SG_IO...