Hi,
I am trying to build a computer. My knowledge is limited.
1) SUPERMICRO MBD-H12DSi-N6-O motherboard
https://www.supermicro.com/en/produc...ard/H12DSi-NT6 https://www.supermicro.com/manuals/m...0/MNL-2363.pdf
2) CPU: 2x AMD Epyc 7V12 processors (64 core each, 240 TDP, 2.45 Ghz)
3) memory: 16x 32GB 4DRx4 PC4-2133 LRDIMM DDR4-17000 ECC
Samsung M386A4G40DM0-CPB 32GB 4DRx4 PC4-2133 LRDIMM DDR4-17000 ECC Memory RAM | eBay
3) CPU Coolers : Noctua NH-U14S TR4-SP3
https://www.amazon.com/dp/B074DX2SX7...roduct_details
4) PSU: Corsair HX1500i
https://www.amazon.com/dp/B074DX2SX7...roduct_details
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I did research before buying every single component.
the board posts. i can get into the BIOS.
But there are big problems. I have a hard time downloading windows 10.
mem86 tests fails (stops at the beginning)
Supermicro IPMI: sees both processors and all 16 memory sticks and thinks they are healthy. (i also decreased to 2 rams (one for each processor) and they are healthy.
before post, Sometimes "CPU initialization" fails. the screen gets stuck at 68
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Where I am right now:
1) it posts and goes to BIOS fine.
2) IPMI: I see 2x CPU's and Memory as healthy. (tried 16 and 2 memory sticks all shown healthy)
3) mem86 : fails (latest version, starts and stops immediately) like a hardware failure.
4) CPU? Also, sometimes-rarely during posting it gets stuck (and needs rebooting): at "CPU initialization" code 68
5) CPU installation was fine.
6) case standoffs were very small, i wonder if it may be related with that.
7) CPU installation: i used a S20 torx screw . But no pressures etc. I wonder if that's the problem.?
----------------------------------
I will try 1 CPU 1 ram tonight and see what happens.
If you guys have an idea of how to fix this problem, I would really appreciate...
thanks!!!
I am trying to build a computer. My knowledge is limited.
1) SUPERMICRO MBD-H12DSi-N6-O motherboard
https://www.supermicro.com/en/produc...ard/H12DSi-NT6 https://www.supermicro.com/manuals/m...0/MNL-2363.pdf
2) CPU: 2x AMD Epyc 7V12 processors (64 core each, 240 TDP, 2.45 Ghz)
3) memory: 16x 32GB 4DRx4 PC4-2133 LRDIMM DDR4-17000 ECC
Samsung M386A4G40DM0-CPB 32GB 4DRx4 PC4-2133 LRDIMM DDR4-17000 ECC Memory RAM | eBay
3) CPU Coolers : Noctua NH-U14S TR4-SP3
https://www.amazon.com/dp/B074DX2SX7...roduct_details
4) PSU: Corsair HX1500i
https://www.amazon.com/dp/B074DX2SX7...roduct_details
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I did research before buying every single component.
the board posts. i can get into the BIOS.
But there are big problems. I have a hard time downloading windows 10.
mem86 tests fails (stops at the beginning)
Supermicro IPMI: sees both processors and all 16 memory sticks and thinks they are healthy. (i also decreased to 2 rams (one for each processor) and they are healthy.
before post, Sometimes "CPU initialization" fails. the screen gets stuck at 68
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Where I am right now:
1) it posts and goes to BIOS fine.
2) IPMI: I see 2x CPU's and Memory as healthy. (tried 16 and 2 memory sticks all shown healthy)
3) mem86 : fails (latest version, starts and stops immediately) like a hardware failure.
4) CPU? Also, sometimes-rarely during posting it gets stuck (and needs rebooting): at "CPU initialization" code 68
5) CPU installation was fine.
6) case standoffs were very small, i wonder if it may be related with that.
7) CPU installation: i used a S20 torx screw . But no pressures etc. I wonder if that's the problem.?
----------------------------------
I will try 1 CPU 1 ram tonight and see what happens.
If you guys have an idea of how to fix this problem, I would really appreciate...
thanks!!!