Server sits idle at about 160w
When I begin running the following inside a VPS (ZFS) power goes up to 300w
Then on the main node I run
It seems to never go above 515w
even once CPU/RAM/Disk is running at/near 100%
The original PSU was only 500w on the Supermicro CSE-826 I upgraded that to two PWS-920p-SQ does this sound about right to you guys? I was expecting more and the fact it's near 500 makes me think there maybe a bottleneck somewhere. IPMI is showing no censor errors.
Specs:
Supermicro H12DSI-N6 Motherboard
2x AMD EPYC 7542
512GB RAM (16x32G)
When I begin running the following inside a VPS (ZFS) power goes up to 300w
Code:
fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test --filename=random_read_write.fio --bs=4k --iodepth=64 --size=300G --readwrite=randrw --rwmixread=75
Code:
stress-ng --cpu 128 --io 2 --vm 1 --vm-bytes 470G --timeout 1h --metrics-brief
even once CPU/RAM/Disk is running at/near 100%
The original PSU was only 500w on the Supermicro CSE-826 I upgraded that to two PWS-920p-SQ does this sound about right to you guys? I was expecting more and the fact it's near 500 makes me think there maybe a bottleneck somewhere. IPMI is showing no censor errors.
Specs:
Supermicro H12DSI-N6 Motherboard
2x AMD EPYC 7542
512GB RAM (16x32G)