Hey all, first of all huge thanks for this thread, for the guide and licenses. Just finished the config process on a new-to-me 6610-24p.
I'd successfully run the process on a 7150-C12P and three 6450's, but running into a unique issue with this 6610.
I've done everything, including specifically entering
username evan password mypasswordstring
, followed by
write mem
, and even did a
reload
.
However when I access it via ip and click the link to login, entering that username and password doesn't work. It just re-prompts me to enter username and password as if it wasn't correct. I've changed the password, and even created a second user named root with just alpha characters in the password, and those credentials won't work for the web UI either.
I've searched this thread with no luck. Any tips?
edit: show run:
Code:
telnet@ICX6610-24P Router#show run
Current configuration:
!
ver 08.0.30uT7f3
!
stack unit 1
module 1 icx6610-24p-poe-port-management-module
module 2 icx6610-qsfp-10-port-160g-module
module 3 icx6610-8-port-10g-dual-mode-module
stack disable
!
!
!
!
vlan 1 name DEFAULT-VLAN by port
router-interface ve 1
!
!
!
!
!
enable telnet authentication
enable aaa console
ip dhcp-client disable
!
username evan password .....
username root password .....
!
!
!
!
!
!
!
!
!
interface ethernet 1/3/1
speed-duplex 10G-full
!
interface ethernet 1/3/2
speed-duplex 10G-full
!
interface ethernet 1/3/3
speed-duplex 10G-full
!
interface ethernet 1/3/4
speed-duplex 10G-full
!
interface ethernet 1/3/5
speed-duplex 10G-full
!
interface ethernet 1/3/6
speed-duplex 10G-full
!
interface ethernet 1/3/7
speed-duplex 10G-full
!
interface ethernet 1/3/8
speed-duplex 10G-full
!
interface ve 1
ip address 192.168.1.2 255.255.255.0
!
!
!
!
!
!
!
!
!
end