smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.17.19-100.fc27.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: TX21B10400GECIBM 98Y4317 98Y4317IBM
Serial Number: F0403MZH
LU WWN Device Id: 5 001173 1000c1694
Firmware Version: PRO6SWS8
User Capacity: 400,088,457,216 bytes [400 GB]
Sector Sizes: 512 bytes logical, 8192 bytes physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Sep 14 22:05:55 2018 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO--CK 120 120 050 - 0/0
5 Retired_Block_Count PO--CK 099 099 003 - 0
9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 24999h+29m+36.750s
12 Power_Cycle_Count -O--CK 100 100 000 - 62
13 Soft_Read_Error_Rate -O--CK 120 120 000 - 1079/0
32 Unknown_Attribute ------ 100 000 000 - 2459
33 Unknown_Attribute ------ 100 000 000 - 1000
100 Gigabytes_Erased ------ 000 000 000 - 1255776256
161 Unknown_Attribute ------ 000 000 000 - 134395
162 Unknown_SandForce_Attr ------ 000 000 000 - 1175844531
170 Reserve_Block_Count POSR-K+ 000 000 000 - 69888
171 Program_Fail_Count -O-R-- 000 000 000 - 0
172 Erase_Fail_Count -O--CK 000 000 000 - 0
174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 66
177 Wear_Range_Delta ------ 000 000 000 - 0
184 IO_Error_Detect_Code_Ct ------ 100 100 090 - 0
187 Reported_Uncorrect --SRC- 100 100 000 - 0
190 Airflow_Temperature_Cel ------ 060 045 029 - 40 (Min/Max 21/55)
194 Temperature_Celsius -O---K 040 055 000 - 40 (Min/Max 21/55)
195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0
196 Reallocated_Event_Count PO--CK 100 100 003 - 0
198 Uncorrectable_Sector_Ct ----C- 120 120 000 - 0/0
199 SATA_CRC_Error_Count --S--- 200 200 000 - 0
230 Life_Curve_Status PO--C- 100 100 000 - 100
231 SSD_Life_Left PO--C- 092 092 010 - 30064771073
232 Available_Reservd_Space -O--CK 000 000 000 - 136
233 SandForce_Internal -O--CK 000 000 000 - 1175844531
234 SandForce_Internal -O--CK 000 000 000 - 1324574208
241 Lifetime_Writes_GiB ------ 000 000 000 - 1324574208
242 Lifetime_Reads_GiB ------ 000 000 000 - 7145422336
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 1 Device Statistics log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa8 GPL,SL VS 16 Device vendor specific log
0xb0 GPL,SL VS 1 Device vendor specific log
0xb1 GPL,SL VS 16 Device vendor specific log
0xb7 GPL,SL VS 16 Device vendor specific log
0xd0 GPL VS 65535 Device vendor specific log
0xd0 SL VS 255 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 40 Celsius
Power Cycle Min/Max Temperature: 21/55 Celsius
Lifetime Min/Max Temperature: 21/55 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 00 00 a7 61 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 478 (7)
Index Estimated Time Temperature Celsius
8 2018-09-11 14:30 ? -
... ..(469 skipped). .. -
0 2018-09-14 20:50 ? -
1 2018-09-14 21:00 53 **********************************
2 2018-09-14 21:10 54 ***********************************
3 2018-09-14 21:20 54 ***********************************
4 2018-09-14 21:30 54 ***********************************
5 2018-09-14 21:40 51 ********************************
6 2018-09-14 21:50 40 *********************
7 2018-09-14 22:00 ? -
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 64 --- Lifetime Power-On Resets
0x01 0x010 4 24999 --- Power-on Hours
0x01 0x018 6 169545525767 --- Logical Sectors Written
0x01 0x028 6 914614063112 --- Logical Sectors Read
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 95 --- Resets Between Cmd Acceptance and Completion
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 95 --- Number of Hardware Resets
0x06 0x010 4 41 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 255 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS