New Profile Posts

  1. falanger
    falanger drabadue
    Good afternoon. Did you half-use the video card through the GPGPU cable? Or in general, someone nibut?
  2. kemic
    kemic MatrixMJK
    Hi, I saw an old post where you mentioned the Sun F20 firmware (latest). If you still have access/entitlements to this, can you send a copy my way?

    1. MatrixMJK
      Unfortunately I do not have access to that anymore. If I find the files I'll let you know, but it's doubtful at this point.
      May 18, 2018
  3. Nnyan
    Nnyan workingnonstop
    If there are any remaining motherboards I would be interested. My zip is 95819

    Thank you
  4. zunder1990
    zunder1990 poto
    I saw your post about the F80, is it possible to make it show single 800gb drive to the OS and not 4x 200gb drives?
  5. Half Jaw Elite
    Half Jaw Elite MiniKnight
  6. fohdeesha
  7. AT S37=0
    AT S37=0
    Trying to compile stuff for the Freescale T2080
    1. Patrick likes this.
  8. vl1969
    vl1969 coolrunnings82
    [quote]coolrunnings82 said: ↑
    Anyone interested in a heavily modified 846 with a TQ backplane? If so, contact me. I consolidated my servers to some Dell R720's and as such have an 846 I gutted and put in a 120mm fan wall + modified for a standard PC power supply... Willing to let it go pretty cheap.[\quote]

    where are you located and what do you want for it.
    I might go for a second box :)
  9. Twice_Shy
    First project on agenda be finishing the RAT-RAIT "redundant array of inexpensive tape" project hopefully online by Feb 2018.
  10. ullbeking
    ullbeking vegeta
  11. ELit3
    What's the best proxywallet?
  12. denywinarto
    denywinarto CyberSkulls
    Hi CyberSkulls, i noticed you had some issues with sas card with HGST 4u60,
    Did you manage to resolve it? My Dell SC8000 card wont detect 12th drive and i'm considering replacing it.
    Do you know any cards that could properly detect 60 drives for that chassis?

  13. Harry P. Nyce
    Harry P. Nyce
    Hello, i'm nice.
  14. Twice_Shy
    finally back in school :)
  15. ELit3
    Is it a specific URL to log into an APC PDU?
  16. fossxplorer
    fossxplorer Craash
    can u delete the quote please?
  17. Savant
    Savant nitrobass24
    Still have the 4 x ironwolfs? Whats the best you can do on all 4 shipped to 80239?
  18. ELit3
    Anyone know a hard drive scrapper?
  19. ELit3
    Can anyone enlighten me on what a fabric extender is? I'm seeing them so cheap on ebay and wondering why the switches are more.
    1. ecosse
      Not an expert here but in the limited exposure I have had... extenders extend an existing fabric. They don't typically increase any bandwidth, just provide more ports, so essentially you are reducing the potential bandwidth/port but gaining more ports. So they are useful if you have run out of ports on the switch but the switch bandwidth is under-utilised.
      Sep 1, 2017
      ELit3 likes this.
  20. ELit3
    Someone recommend me a good cisco core/edge router under $3,000 that can support 4x10G uplinks.