SuperMicro SuperServer 1026T-URF x4 $300ea

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

modder man

Active Member
Jan 19, 2015
657
84
28
33
I have 4 of these servers that are no longer in use, they all have seen very little real use. They were new one I got them and they have just sat racked up. 3 have dual E5520 and the 4th has dual L5520. None of them currently have any ram, but I could work something out if someone has interest. All of them are fully populated with fans which is not the way the come from the factory. I filled them up to keep them running cooler and quieter, it helped quite a bit. If my price is out of line let me know as these need to go, just picked a starting point.

 

abstractalgebra

Active Member
Dec 3, 2013
182
26
28
MA, USA
Looks nice. The Supermicro page reports 6 SATA ports but it has 8 bays which seams odd.
"Serial ATA: Six SATA hard drives supported"

Highlights from supermicro site
  • 1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB
    Unbuffered DIMM [12 slots]
  • Left Slot (Full-height / Full-length): 1 (x16) PCI-E 2.0 + 1 UIO
  • Right Slot (Low-Profile)
  • 2 Gigabit LAN optional (AOC-PG-i2+)
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • 8 x 2.5" Hot-swap Drive Bays, For Customizable Storage
  • 650W High-efficiency Redundant Power Supply
 

modder man

Active Member
Jan 19, 2015
657
84
28
33
They are intended to be used with an HBA or Raid controller. I actually have a few of each that could be used with these.
 

dgcruiser

New Member
Oct 7, 2015
3
1
3
35
I am interested. Do they come populated with drives already? RAM would be nice as well, but I can always get some o throw in.
 

modder man

Active Member
Jan 19, 2015
657
84
28
33
They do not have ram or drives currently but something could likely be worked out as I have some of both around