Supermicro SC743A-1000-SQ PS1 Status turned yellow in SuperDoctor5

[freemarket]

Hi,
On the web GUI for SuperDoctor5, on my M12SWA-TF system, I am now seeing a yellow alert status on the PSU (PS1) as:


Per SMC tech support, I have done a Unit Reset on the BMC on the IPMI web page with no change in status. ipmitool shows PS1 status as:

PS1 Status | 0x1 | discrete | 0x0100| na | na | na | na | na | na

There is a red light on the front LED display:



I haven't bounced it recently to see if that changes anything. Any more tests to run to see if this is an issue?

Thanks,
Henry

 

[i386]

Ist the psmb cable connected?

 

[freemarket]

Ist the psmb cable connected?

I can't see how it wouldn't be as the system is functioning perfectly. I should point out that from the IPMI web page there is indeed a green check for the PSU status. Will try a power cycle and unplug power cord for 5 minutes as per SMC recommendation.

 

[freemarket]

So power down and unplug power cord for 5 minutes seemed to work and eliminate red LED light. Interestingly though upon boot up, O/S had renamed my NICs so that I had to manually reconfigure network. Did not see any changes to /etc/udev/*