I bought a P3700 from ebay and here is part of the smartctl output:
The PBW is unusually high and I think it passed the Intel endurance threshold, but the available spare is still 100%. Something wrong with this drive?
There is also a bunch error entries:
TIA
Code:
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 28 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 137,777,948,212 [70.5 PB]
Data Units Written: 140,116,515,500 [71.7 PB]
Host Read Commands: 1,884,131,082
Host Write Commands: 1,887,107,611
Controller Busy Time: 153
Power Cycles: 282
Power On Hours: 586
Unsafe Shutdowns: 469
Media and Data Integrity Errors: 70
Error Information Log Entries: 0
There is also a bunch error entries:
Code:
Error Information (NVMe Log 0x01, max 64 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 62 1 0x0c77 0x4502 0x000 1032 1 -
1 61 1 0x0c76 0x4502 0x000 1024 1 -
2 60 1 0x011c 0x4502 0x000 0 1 -
3 59 1 0x00f0 0x4502 0x000 0 1 -
4 58 1 0x00cb 0x4502 0x000 0 1 -
5 57 1 0x004a 0x4502 0x000 0 1 -
6 56 1 0x00ef 0x4502 0x000 0 1 -
7 55 1 0x006d 0x4502 0x000 0 1 -
8 54 1 0x00a5 0x4502 0x000 0 1 -
9 53 1 0x007f 0x4502 0x000 0 1 -
10 52 1 0x011d 0x4502 0x000 0 1 -
11 51 1 0x0143 0x4502 0x000 0 1 -
12 50 1 0x009e 0x4502 0x000 0 1 -
13 49 1 0x0104 0x4502 0x000 0 1 -
14 48 1 0x0106 0x4502 0x000 0 1 -
15 47 1 0x004a 0x4502 0x000 0 1 -
... (46 entries not shown)