NH-U14s with H11DSI

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
J

Jamy

Member
Mar 29, 2017
44
6
8
48
Hi all,

I'm building an Epyc server with the Supermicro H11DSI board. Anyone know if two Noctua NH-u14 coolers
will fit on a Supermicro H11DSI?
 
Last edited:
T

TXAG26

Active Member
Aug 2, 2016
414
129
43
Not sure about width, but last I checked, the NH-U14's are too tall for a 4U server chassis.
 
Patriot

Patriot

Moderator
Apr 18, 2011
1,470
801
113
Jamy said:
Hi all,

I'm building an Epyc server with the Supermicro H11DSI board. Anyone know if two Noctua NH-u14 cools will fit on a Supermicro H11DSI?
Click to expand...
Noctua makes SP3 versions for epyc/threadripper, you will need to use those versions. The desktop versions will not have coverage.
Then you will need to get the one that fits your chassis. I believe the 140mm are too big for the dual socket boards, you will need 1 140 1 120 or 2 120s.
 
J

Jamy

Member
Mar 29, 2017
44
6
8
48
Patriot said:
Noctua makes SP3 versions for epyc/threadripper, you will need to use those versions. The desktop versions will not have coverage.
Then you will need to get the one that fits your chassis. I believe the 140mm are too big for the dual socket boards, you will need 1 140 1 120 or 2 120s.
Click to expand...
I'm also considering liquid cooling. Deepcool makes several models with TR4/SP3 support. Anyone have experience with those?
 
You must log in or register to reply here.
Top Bottom