Looking for a 19.5" rack mount chassis for 3-slot consumer GPUs

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

thunderdolt

New Member
Dec 5, 2021
3
0
1
I see plenty of server options for 8-10 GPUs, but they're all on 2-slot spacing. That means consumer cards, which are typically "2.5" slots wide, end up maxing those out with only 4 to 5 cards installed (unless they are water cooled, which brings them back down to 2-slot width).

Are there any options out there which can handle 6-7 consumer 3-slot GPUs (7x60mm = 16.5" -> fits through a standard 18.5" rack opening)? Ideally, is there even one which uses standard server PSUs?