Gigabyte MZ31-AR0 BIOS always start with “ROM Image is not loaded ROM Image updated denied"

Discussion in 'Processors and Motherboards' started by james2019, Oct 22, 2019.

  1. james2019

    james2019 New Member

    Joined:
    Oct 11, 2019
    Messages:
    5
    Likes Received:
    0
    I had this “ROM Image is not loaded ROM Image updated denied" error every time when I reboot the system, it would just go to BIOS setup directly after Gigabyte splash screen rather than boot from SSD where I have ubuntu installed, I had to manually "Save and Exit" the BIOS to enter the ubuntu, but next time when you reboot, it enters into BIOS directly again with this error message.
    Search the internet and get most of the answers are just return/refund the motherboard or some, anyone had same experience or any enlight some clue on this?

    WechatIMG3.jpeg
     
    #1
  2. csp-guy

    csp-guy Active Member

    Joined:
    Jun 26, 2019
    Messages:
    105
    Likes Received:
    28
    Did you asked GB support?

    I plan to buy this board, or MZ01-CE0, but it is going to be a disappointment you wrote.
     
    #2
  3. james2019

    james2019 New Member

    Joined:
    Oct 11, 2019
    Messages:
    5
    Likes Received:
    0
    This issue has been resolved by putting a jumper on the BIOS recovery jumper 1 and 2, so far so good. The motherboard itself is superior to other on its specification, the only thing Gigabyte did really bad is the manual and user guide, really need you to do some guesswork.
     
    #3
Similar Threads: Gigabyte MZ31-AR0
Forum Title Date
Processors and Motherboards Help! Gigabyte MZ31-AR0 no video Aug 2, 2019
Processors and Motherboards Gigabyte MZ31-Ar0 No Display/POST May 16, 2019
Processors and Motherboards How to Enable IOMMU on Gigabyte MZ31-AR0 Sep 24, 2018
Processors and Motherboards Gigabyte MZ31-AR0 memory configuration Jun 4, 2018
Processors and Motherboards Gigabyte MZ31-AR0 wont boot/install server 2016? Feb 15, 2018

Share This Page