(cross-posted from /r/homelabsales)
If you've been around here long enough, you've probably heard of these switches.
This switch was the core of my home network for about 4 years and served me well. I replaced it with another ICX6610-48P last summer (long story short, it turns out that the PSUs in this one did not like my consumer-grade stepped-sine wave UPS, but they're totally fine with straight utility power or my beefy rack-mounted APC UPS).
I have dual power supplies for it and one fan module. As far as I know, all ports work (though I've never had enough devices to actually use them myself). Works great, as long as you don't try to use it with a consumer CyberPower UPS... All firmware is up to date and rack ears are included.
See FCX / ICX6610 - Fohdeesha Docs for configuration, licensing (needed to enable all of the 10 gig ports), and more.
Asking $100 OBO for local pickup (I'm in 98030, but can probably arrange a meetup anywhere in South King County). I'm willing to ship, but as I don't have a big enough box on hand or enough padding material, the buyer will need to pay for supplies and actual shipping cost. I'd prefer to avoid that hassle if I can, so preference for a local sale.
Payment via local cash or PayPal Goods & Services.
I'll include power cords and, if you want, a Cisco-style DB9 to RJ45 serial console cable. Probably can find a few 10gig DACs to include as well. Maybe some SFP+ modules, too.
Pics:
Console logs: BOOT INFO: load monitor from boot flash, cksum = 71f1BOOT INFO: verify flash f - Pastebin.com
For those not familiar, this Brocade switch has:
If you've been around here long enough, you've probably heard of these switches.
This switch was the core of my home network for about 4 years and served me well. I replaced it with another ICX6610-48P last summer (long story short, it turns out that the PSUs in this one did not like my consumer-grade stepped-sine wave UPS, but they're totally fine with straight utility power or my beefy rack-mounted APC UPS).
I have dual power supplies for it and one fan module. As far as I know, all ports work (though I've never had enough devices to actually use them myself). Works great, as long as you don't try to use it with a consumer CyberPower UPS... All firmware is up to date and rack ears are included.
See FCX / ICX6610 - Fohdeesha Docs for configuration, licensing (needed to enable all of the 10 gig ports), and more.
Asking $100 OBO for local pickup (I'm in 98030, but can probably arrange a meetup anywhere in South King County). I'm willing to ship, but as I don't have a big enough box on hand or enough padding material, the buyer will need to pay for supplies and actual shipping cost. I'd prefer to avoid that hassle if I can, so preference for a local sale.
Payment via local cash or PayPal Goods & Services.
I'll include power cords and, if you want, a Cisco-style DB9 to RJ45 serial console cable. Probably can find a few 10gig DACs to include as well. Maybe some SFP+ modules, too.
Pics:
Console logs: BOOT INFO: load monitor from boot flash, cksum = 71f1BOOT INFO: verify flash f - Pastebin.com
For those not familiar, this Brocade switch has:
- 48 10/100/1000 Mbps RJ45 PoE+ ports
- 8 front-facing 1/10 Gbps SFP+ ports
- 8 10 Gbps ports on the rear (via two QSFP+ connections that are 4x10Gbps each- you need a fanout cable of some kind to get to the 10Gbps connections - 4050-00287-01 Extreme Networks 10321 QSFP+ 4xSFP+ FAN-OUT Cable 3.0M | eBay is the first example I could find; there are probably less-expensive options)
- 2 40Gbps QSFP+ ports on the rear
