I'm back, with no news. I read a few posts about this switch and tried to contact whoever solved it without feedback.
With this post I ask for help from all those who can, and I hope it can help other people who have or will have a similar problem with this switch, which despite being EOL is still for sale both new and numerous used.
Juniper does not enable my account and I don't understand what the problem is with making an EOL switch firmware available.
Now I bore you with problems.
First I can't get into the command prompt. Connected with serial console, I've tried many times, pressing the spacebar but nothing. I also tried with the keyboard connected to the switch's USB.
Given all the problems there are I guess the firmware is corrupt, for this problem if someone is in possession of the "junOS" (jinstall-ex-2200 .......) please share it.
With this post I ask for help from all those who can, and I hope it can help other people who have or will have a similar problem with this switch, which despite being EOL is still for sale both new and numerous used.
Juniper does not enable my account and I don't understand what the problem is with making an EOL switch firmware available.
Now I bore you with problems.
First I can't get into the command prompt. Connected with serial console, I've tried many times, pressing the spacebar but nothing. I also tried with the keyboard connected to the switch's USB.
Given all the problems there are I guess the firmware is corrupt, for this problem if someone is in possession of the "junOS" (jinstall-ex-2200 .......) please share it.
U-Boot 1.1.6 (Jul 26 2011 - 03:19:50)
Board: EX2200-24T-4G 4.18
EPLD: Version 04.100311 (0x10)
DRAM: Initializing (512MB)
Flash: 8 MB
Firmware Version:01.00.00
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/arm U-Boot loader, Revision 1.1
(builder@dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is not set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x7dc7f4+0xa5afc syms=[0x4+0xdcef0+0x4+0xb4432]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2011, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 11.4R1.6 #0: 2011-11-15 10:11:59 UTC
builder@evenath.juniper.net:/volume/build/junos/11.4/release/11.4R1.6/obj-arm/bsd/kernels/JUNIPER-EX-2200/kernel
can't re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 507396096 (483 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on mbus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,36,37,38,39,40,41 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
ugen0: SONiX USB Keyboard, rev 2.00/2.20, addr 4
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,13,14,11,46 on mbus0
mge0: hardware MAC address 78:fe:3d:ea:e7:3f
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on mbus0
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
poe_attach: re-types method failed
device_attach: poe0 attach returned 19
cfi0: <SPI flash - 8MB> at mem 0xf1010600-0xf101062f,0xf8000000-0xf87fffff irq 23 on mbus0
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff irq 113 on mbus0
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041fff,0xe8000000-0xefffffff irq 9 on mbus0
pci0: <PCI bus> on pcib0
Initializing product: 75 ..
bmeb: bmeb_lib_init done 0xc328e800, addr 0xc1c7ca58
bme0:Virtual BME driver initializing
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_11_4_0
Verified jboot signed by PackageProduction_11_4_0
Verified jbase-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jcrypto-ex package on /dev/md1...
Verified manifest signed by PackageProduction_11_4_0
Verified jcrypto-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jdocs-ex package on /dev/md2...
Verified manifest signed by PackageProduction_11_4_0
Verified jdocs-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jkernel-ex-2200 package on /dev/md3...
Verified manifest signed by PackageProduction_11_4_0
Verified jkernel-ex-2200-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jpfe-ex22x package on /dev/md4...
Verified manifest signed by PackageProduction_11_4_0
Verified jpfe-ex22x-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jroute-ex package on /dev/md5...
Verified manifest signed by PackageProduction_11_4_0
Verified jroute-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jswitch-ex package on /dev/md6...
Verified manifest signed by PackageProduction_11_4_0
Verified jswitch-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jweb-ex package on /dev/md7...
Verified manifest signed by PackageProduction_11_4_0
Verified jweb-ex-11.4R1.6 signed by PackageProduction_11_4_0
Executing /packages/mnt/jweb-ex-11.4R1.6/mount.post..
Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 45465 free (33 frags, 5679 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
799 files, 3953 used, 58949 free (341 frags, 7326 blocks, 0.5% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
25 files, 194 used, 188660 free (28 frags, 23579 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0s4d
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
70 files, 72 used, 31534 free (30 frags, 3938 blocks, 0.1% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
Creating initial configuration...mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
EVENTD_SOCKET_FAILURE: 'bind socket' failed for socket 6: Read-only file system
Abort trap (core dumped)
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-series platform NETPFE module
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Sun Aug 28 22:24:17 UTC 2022
Boot media /dev/da0 has dual root support
** /dev/da0s1a
** Last Mounted on /
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1409 files, 48637 used, 44953 free (25 frags, 5616 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
AAAAAAAAAAAAAAAAAAAAAAAAAmpfe_ioctl: oir=0, mode=0xdb00
Amnesiac (ttyu0)
login: Aug 28 22:24:33 init: event-processing (PID 947) terminated by signal number 6. Core dumped!
Aug 28 22:24:35 init: event-processing (PID 957) started
Aug 28 22:24:36 init: chassis-control (PID 905) exited with status=69
Aug 28 22:24:36 init: chassis-control (PID 958) started
devrt_client_self_member_change_notify nmember 0 omember -1
Aug 28 22:24:42 init: event-processing (PID 957) terminated by signal number 6. Core dumped!
Aug 28 22:24:42 init: event-processing (PID 985) started
Aug 28 22:24:45 init: chassis-control (PID 958) terminated by signal number 31!
Aug 28 22:24:45 init: chassis-control (PID 1011) started
Aug 28 22:24:45 init: interface-control (PID 904) terminate signal sent
Aug 28 22:24:45 init: ethernet-link-fault-management (PID 1013) started
Aug 28 22:24:45 init: ethernet-connectivity-fault-management (PID 1014) started
Aug 28 22:24:45 init: snmp (PID 909) terminate signal sent
Aug 28 22:24:45 init: mib-process (PID 910) terminate signal sent
Aug 28 22:24:45 init: routing (PID 1015) started
Aug 28 22:24:48 init: sntpsync (PID 913) SIGTERM sent
Aug 28 22:24:48 init: pfe (PID 914) terminate signal sent
Aug 28 22:24:48 init: class-of-service (PID 1019) started
Aug 28 22:24:48 init: periodic-packet-services (PID 915) sending signal hup: due to "proto-mastership": 0x1
Aug 28 22:24:49 init: kernel-replication (PID 917) SIGTERM sent
Aug 28 22:24:49 init: firewall (PID 945) terminate signal sent
Aug 28 22:24:49 init: neighbor-liveness (PID 946) sending signal hup: due to "proto-mastership": 0x1
Aug 28 22:24:49 init: dhcp (PID 1020) started
Aug 28 22:24:49 init: redundancy-device (PID 1021) started
Aug 28 22:24:49 init: secure-neighbor-discovery (PID 1022) started
Aug 28 22:24:49 init: ethernet-switching (PID 1023) started
Aug 28 22:24:49 init: web-management (PID 1024) started
Aug 28 22:24:49 init: pki-service (PID 1026) started
Aug 28 22:24:50 init: vchassis-diag-manager (PID 1027) started
Aug 28 22:24:50 init: sflow-service (PID 1028) started
Aug 28 22:24:50 init: multicast-snooping (PID 1029) started
Aug 28 22:24:51 init: event-processing (PID 985) terminated by signal number 6. Core dumped!
Aug 28 22:24:51 init: event-processing (PID 1033) started
Aug 28 22:24:52 init: firewall (PID 945) exited with status=0 Normal Exit
Aug 28 22:24:53 init: firewall (PID 1034) started
Aug 28 22:24:53 init: kernel-replication (PID 917) exited with status=0 Normal Exit
Aug 28 22:24:53 init: pfe (PID 914) exited with status=0 Normal Exit
Aug 28 22:24:53 init: pfe (PID 1035) started
Aug 28 22:24:53 init: sntpsync (PID 913) terminated by signal number 15!
Aug 28 22:24:53 init: mib-process (PID 910) terminated by signal number 15!
Aug 28 22:24:53 init: mib-process (PID 1037) started
Aug 28 22:24:53 init: snmp (PID 909) terminated by signal number 15!
Aug 28 22:24:54 init: snmp (PID 1038) started
Aug 28 22:24:54 init: interface-control (PID 904) exited with status=0 Normal Exit
Aug 28 22:24:54 init: interface-control (PID 1041) started
Aug 28 22:24:54 init: web-management (PID 1024) exited with status=1
Aug 28 22:24:54 init: web-management (PID 1043) started
Aug 28 22:25:00 init: event-processing (PID 1033) terminated by signal number 6. Core dumped!
Aug 28 22:25:00 init: event-processing is thrashing, not restarted
Aug 28 22:25:05 init: web-management (PID 1043) exited with status=1
Aug 28 22:25:05 init: web-management (PID 1081) started
Aug 28 22:25:13 init: web-management (PID 1081) exited with status=1
Aug 28 22:25:13 init: web-management (PID 1113) started
Aug 28 22:25:22 init: web-management (PID 1113) exited with status=1
Aug 28 22:25:22 init: web-management is thrashing, not restarted
Board: EX2200-24T-4G 4.18
EPLD: Version 04.100311 (0x10)
DRAM: Initializing (512MB)
Flash: 8 MB
Firmware Version:01.00.00
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
ELF file is 32 bit
Consoles: U-Boot console
FreeBSD/arm U-Boot loader, Revision 1.1
(builder@dagmath.juniper.net, Tue Jul 26 01:25:53 UTC 2011)
Memory: 512MB
bootsequencing is enabled
bootsuccess is not set
new boot device = disk0s2:
Loading /boot/defaults/loader.conf
/kernel data=0x7dc7f4+0xa5afc syms=[0x4+0xdcef0+0x4+0xb4432]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x1400100 ...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2011, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 11.4R1.6 #0: 2011-11-15 10:11:59 UTC
builder@evenath.juniper.net:/volume/build/junos/11.4/release/11.4R1.6/obj-arm/bsd/kernels/JUNIPER-EX-2200/kernel
can't re-use a leaf (all_slot_serialid)!
CPU: Feroceon 88FR131 rev 1 (Marvell core)
WB enabled EABT branch prediction enabled
16KB/32B 4-way Instruction cache
16KB/32B 4-way write-back-locking-C Data cache
real memory = 536870912 (512 MB)
avail memory = 507396096 (483 MB)
SOC: Marvell 88F6281 rev A0, TClock 200MHz
ETHERNET SOCKET BRIDGE initialising
Initializing EXSERIES platform properties ...
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on mbus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,36,37,38,39,40,41 on mbus0
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
ehci0: <88F5XXX Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0
usb0: EHCI version 1.0
usb0 on ehci0
usb0: USB revision 2.0
uhub0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
ugen0: SONiX USB Keyboard, rev 2.00/2.20, addr 4
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,13,14,11,46 on mbus0
mge0: hardware MAC address 78:fe:3d:ea:e7:3f
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1118 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
i2c0: <Marvell I2C ARM OnChip Controller> at mem 0xf1011000-0xf101101f irq 29 on mbus0
syspld0: <SYSPLD> on i2c0
8564 rtc0: <8564 RTC> on i2c0
poe0: <POE> on i2c0
poe_attach: re-types method failed
device_attach: poe0 attach returned 19
cfi0: <SPI flash - 8MB> at mem 0xf1010600-0xf101062f,0xf8000000-0xf87fffff irq 23 on mbus0
mpfe0: <Juniper EX-series Packet Forwarding Engine> at mem 0xf4000000-0xf7ffffff irq 113 on mbus0
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041fff,0xe8000000-0xefffffff irq 9 on mbus0
pci0: <PCI bus> on pcib0
Initializing product: 75 ..
bmeb: bmeb_lib_init done 0xc328e800, addr 0xc1c7ca58
bme0:Virtual BME driver initializing
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s2a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...
Verified manifest signed by PackageProduction_11_4_0
Verified jboot signed by PackageProduction_11_4_0
Verified jbase-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jcrypto-ex package on /dev/md1...
Verified manifest signed by PackageProduction_11_4_0
Verified jcrypto-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jdocs-ex package on /dev/md2...
Verified manifest signed by PackageProduction_11_4_0
Verified jdocs-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jkernel-ex-2200 package on /dev/md3...
Verified manifest signed by PackageProduction_11_4_0
Verified jkernel-ex-2200-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jpfe-ex22x package on /dev/md4...
Verified manifest signed by PackageProduction_11_4_0
Verified jpfe-ex22x-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jroute-ex package on /dev/md5...
Verified manifest signed by PackageProduction_11_4_0
Verified jroute-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jswitch-ex package on /dev/md6...
Verified manifest signed by PackageProduction_11_4_0
Verified jswitch-ex-11.4R1.6 signed by PackageProduction_11_4_0
Mounted jweb-ex package on /dev/md7...
Verified manifest signed by PackageProduction_11_4_0
Verified jweb-ex-11.4R1.6 signed by PackageProduction_11_4_0
Executing /packages/mnt/jweb-ex-11.4R1.6/mount.post..
Automatic reboot in progress...
Media check on da0 on ex platforms
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 45465 free (33 frags, 5679 blocks, 0.0% fragmentation)
Computing slice and partition sizes for /dev/da0 ...
** /dev/da0s3e
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
799 files, 3953 used, 58949 free (341 frags, 7326 blocks, 0.5% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
savecore: Reboot reason(s): 0x1: power cycle/failure
No dump exists
** /dev/da0s3d
** Last Mounted on /var/tmp
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
25 files, 194 used, 188660 free (28 frags, 23579 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
** /dev/da0s4d
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
70 files, 72 used, 31534 free (30 frags, 3938 blocks, 0.1% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
Creating initial configuration...mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: .
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
EVENTD_SOCKET_FAILURE: 'bind socket' failed for socket 6: Read-only file system
Abort trap (core dumped)
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-series platform NETPFE module
if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Sun Aug 28 22:24:17 UTC 2022
Boot media /dev/da0 has dual root support
** /dev/da0s1a
** Last Mounted on /
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
1409 files, 48637 used, 44953 free (25 frags, 5616 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
AAAAAAAAAAAAAAAAAAAAAAAAAmpfe_ioctl: oir=0, mode=0xdb00
Amnesiac (ttyu0)
login: Aug 28 22:24:33 init: event-processing (PID 947) terminated by signal number 6. Core dumped!
Aug 28 22:24:35 init: event-processing (PID 957) started
Aug 28 22:24:36 init: chassis-control (PID 905) exited with status=69
Aug 28 22:24:36 init: chassis-control (PID 958) started
devrt_client_self_member_change_notify nmember 0 omember -1
Aug 28 22:24:42 init: event-processing (PID 957) terminated by signal number 6. Core dumped!
Aug 28 22:24:42 init: event-processing (PID 985) started
Aug 28 22:24:45 init: chassis-control (PID 958) terminated by signal number 31!
Aug 28 22:24:45 init: chassis-control (PID 1011) started
Aug 28 22:24:45 init: interface-control (PID 904) terminate signal sent
Aug 28 22:24:45 init: ethernet-link-fault-management (PID 1013) started
Aug 28 22:24:45 init: ethernet-connectivity-fault-management (PID 1014) started
Aug 28 22:24:45 init: snmp (PID 909) terminate signal sent
Aug 28 22:24:45 init: mib-process (PID 910) terminate signal sent
Aug 28 22:24:45 init: routing (PID 1015) started
Aug 28 22:24:48 init: sntpsync (PID 913) SIGTERM sent
Aug 28 22:24:48 init: pfe (PID 914) terminate signal sent
Aug 28 22:24:48 init: class-of-service (PID 1019) started
Aug 28 22:24:48 init: periodic-packet-services (PID 915) sending signal hup: due to "proto-mastership": 0x1
Aug 28 22:24:49 init: kernel-replication (PID 917) SIGTERM sent
Aug 28 22:24:49 init: firewall (PID 945) terminate signal sent
Aug 28 22:24:49 init: neighbor-liveness (PID 946) sending signal hup: due to "proto-mastership": 0x1
Aug 28 22:24:49 init: dhcp (PID 1020) started
Aug 28 22:24:49 init: redundancy-device (PID 1021) started
Aug 28 22:24:49 init: secure-neighbor-discovery (PID 1022) started
Aug 28 22:24:49 init: ethernet-switching (PID 1023) started
Aug 28 22:24:49 init: web-management (PID 1024) started
Aug 28 22:24:49 init: pki-service (PID 1026) started
Aug 28 22:24:50 init: vchassis-diag-manager (PID 1027) started
Aug 28 22:24:50 init: sflow-service (PID 1028) started
Aug 28 22:24:50 init: multicast-snooping (PID 1029) started
Aug 28 22:24:51 init: event-processing (PID 985) terminated by signal number 6. Core dumped!
Aug 28 22:24:51 init: event-processing (PID 1033) started
Aug 28 22:24:52 init: firewall (PID 945) exited with status=0 Normal Exit
Aug 28 22:24:53 init: firewall (PID 1034) started
Aug 28 22:24:53 init: kernel-replication (PID 917) exited with status=0 Normal Exit
Aug 28 22:24:53 init: pfe (PID 914) exited with status=0 Normal Exit
Aug 28 22:24:53 init: pfe (PID 1035) started
Aug 28 22:24:53 init: sntpsync (PID 913) terminated by signal number 15!
Aug 28 22:24:53 init: mib-process (PID 910) terminated by signal number 15!
Aug 28 22:24:53 init: mib-process (PID 1037) started
Aug 28 22:24:53 init: snmp (PID 909) terminated by signal number 15!
Aug 28 22:24:54 init: snmp (PID 1038) started
Aug 28 22:24:54 init: interface-control (PID 904) exited with status=0 Normal Exit
Aug 28 22:24:54 init: interface-control (PID 1041) started
Aug 28 22:24:54 init: web-management (PID 1024) exited with status=1
Aug 28 22:24:54 init: web-management (PID 1043) started
Aug 28 22:25:00 init: event-processing (PID 1033) terminated by signal number 6. Core dumped!
Aug 28 22:25:00 init: event-processing is thrashing, not restarted
Aug 28 22:25:05 init: web-management (PID 1043) exited with status=1
Aug 28 22:25:05 init: web-management (PID 1081) started
Aug 28 22:25:13 init: web-management (PID 1081) exited with status=1
Aug 28 22:25:13 init: web-management (PID 1113) started
Aug 28 22:25:22 init: web-management (PID 1113) exited with status=1
Aug 28 22:25:22 init: web-management is thrashing, not restarted