I have a DL380 LFF drive bay with 12 slots. It has an 8-pin power connector and I need the voltages for the pins, looking at the connector. My dl380 G7 drive bays use a 10 pin connector so I can't use it.
Something like this, looking at the power connector on the drive bay. There are actually two connectors on the right side, I assume they are the same.
A B
1 |O|O|
2 |O|O|
3 |O|O|
4 |O|O|
I want to set the drive bay up with some fans temporarily.
Thanks.
Jerry
Something like this, looking at the power connector on the drive bay. There are actually two connectors on the right side, I assume they are the same.
A B
1 |O|O|
2 |O|O|
3 |O|O|
4 |O|O|
I want to set the drive bay up with some fans temporarily.
Thanks.
Jerry