Connectx-5 25gb $50usd

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.


May 25, 2021
I was able to force over to latest nvidia.
havent tested 25gig though. 10g works

if no jumper make your own on jp2 otherwise the firmware fails (hpe cards dont have pins). card will show up as a pci memory controller with the pins jumpered..once flashed power down system and remove jumper. the card on next boot will be changed and show up properly as non hp and as a connectx 5

example command line below.

C:\Program Files\Mellanox\WinMFT>flint -d mt525_pciconf0 -i fw-ConnectX5-rel-16_32_1010-MCX512F-ACA_Ax_Bx-UEFI-14.25.17-FlexBoot-3.6.502.bin -allow_psid_change burn flash section: 100%←[2K
Current FW version on flash: 16.23.8054
New FW version: 16.32.1010

You are about to replace current PSID on flash - "HPE0000000039" with a different PSID - "MT_0000000183".
Note: It is highly recommended not to change the PSID.

Do you want to continue ? (y/n) [n] : y
Burning FW image without signatures - 0%


Last edited:
  • Like
Reactions: Serhan and Gene