Hey all -
I recently wrote up a blog post after buying another Supermicro X9DRi-LN4F+ only to find out that the eBay seller had not checked for a BIOS password. After experimenting with all of the suggestions on STH and other blogs I was unable to get it to clear. I tried CMOS battery...
I have a unifi AP setup in standalone mode with a PFSense Router. I want to setup a VLAN Tagged Network with no wireless password (for a guest network).
Issue is, it doesn't seem like I'm allowed to setup an open network? This is what i see:
Anyone tried to do this before? seems like it...
So, I ran into this tonight with a new X11SPL. Apparently in November 2019 Supermicro started programming in unique passwords for IPMI access. It's no longer ADMIN/ADMIN.
The username is still ADMIN, but the password is printed on a sticker on the board.
BMC Unique Password Security Feature...
When logging into a Mikrotik router or switch's management interface, either using the WebFig or Winbox, one is prompted for a login (username) and password.
On Mikrotik the default login/ password is:
Password: <no password>
You can connect to the interface via ether1 port and...
When logging into a Gigabyte IPMI interface on one of their server motherboards, one is prompted for a login (username) and password.
On modern Gigabyte IPMI interfaces the default login/ password is:
Here is what the login screen looks like:
When logging into a Schneider Electric/ APC management interface, one is prompted for a login (username) and password.
On modern APC systems the default login/ password is:
Tested with a few Smart UPS and managed PDUs thus far
Here is what the web management...