I followed the techmattr guide on changing my H200 to IT mode but clearly missed the boat and believe I may have actually bricked my card.
During the UEFI command:
I got the following error:
Going into DOS mode, I tried both:
But in both cases the command would hang with the following...
Hi, I have a R510 with an H200 flashed to ITmode and I can't seem to get better than 230MB/s transfer speed out of it. I've tried moving the H200 out of the storage slot ( that had no effect.)
It's running ubuntu 19.10 with 64 GB of ram.
Here are the numbers
ZFS raidz2 6 4TB driveds to ram...
I have a Dell PE T110 II with an H200 adapter running MS Server 2012R2.
The H200 runs in IR mode and presently has one has one Seagate ST3600057SS (SAS 600GB) in HDD 0 configured for boot. No raid has been configured.
The H200 adapter is flashed to the most current levels available from Dell...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.