gpus

Hi everyone, I am currently in the process of planning an Infiniband Network for our new GPU cluster. We want to be able to run simulation / AI workloads across the big GPU nodes and are hence looking to connect everything with a 100 Gb Infiniband-Network. At first, I was thinking of the...

Hi fellas. I'm in the process of renewing my deep learning hardware, and particularly the GPUs. My host machine has 40 x16 lanes and 3 slots in 16x/16x/8x, so I think I will leave it untouched. Presently, I work with two 1080TIs. Now, to achieve a good price/perf ratio when it comes to buy...

Hi, I am in need for a solution that offers six full x16 pcie lanes. I need 4 slots for 4 GPUs (for deep learning purposes, for certain models and toolboxes I use, GPUs in an x8 slot perform significantly slower than in x16 slots), 1 slot for a 100gigabit Mellanox ConnextX-4 NIC, and 1 slot for...

Hi Guys, I just saw the review on the AMD EPYC 7351P CPU but it did not really go into GPU usage so I thought I would do a post in here to get some feedback and or advice on this. We are looking to build a 7 GPU rack using the EPCY so we can take advantage of the 128 PCIE lanes, basically...

My sm x10dax dual xeon board (dual e5 2683v3 on board, working fine) has stopped recognizing graphics cards if they sit in slots 4 and 5. Slots 4 and 5 are associated with the second cpu (according to manual). Slots 1,3,6 work fine. These slots go with the first cpu. Gpus in 4 and 5 do not even...

I want to use older server hardware to build a rig because I need at least 128gb or ram and it's cheaper than enthusiast grade options. I have a couple questions. I attached a picture of the X9DRI-LN4F+ motherboard and you can see that there are no snaps to snap the GPU in. Will I still be able...