config help

hi, i bought a hasivo network switch and want to set up VLANs but the web interface is confusing to me. this is my first managed switch. before, i only configured subnets on individual physical ports on my firewall (opnsense). i've searched up tutorials on VLANs and i think i understand the...

Hey all. Newbie here, decided to start playing around in the homelab world so here I am. I picked up 2x R620s, a Brocade 6610 L3 switch, and a VMUG membership. I want to play around with vCenter, but when I went to install it, was notified that NTP needed to be set up. No problem right? Just...

Hello, I'm trying to migrate from tiered Windows Storage Spaces volume where I have 2 HDD's (3TB and 4TB) in a slow tier and a 512GB SSD in a fast tier. Windows is, and TrueNAS will be, virtualized with disks connected to a passed-through HBA. Performance is fairly important as I have VM's that...

Hello, so, I am trying to figure out if I understand ZFS and how I should go about setting up TrueNAS. My current hardware is A dell poweredge R720XD, that has 2 SATA boot SSDs on the rear backplane in one mirror and then 24 drive bays in the front I intend to populate with 1TB SAS drives. I was...