Search results

  1. W

    Open Compute WindMill v2 Motherboard

    After windows->shutdown /r /t 0 command system turns off. After turning off the motherboard power supply continues to operate. It is necessary to switch it off by the button. I am trying to invent decision of these problems.
  2. W

    Open Compute WindMill v2 Motherboard

    And yes, I think you need second PSU.
  3. W

    Open Compute WindMill v2 Motherboard

    You may to use PCI-E extension cable Абвестка аб перанакіраваньні My graphics card is rather long it does not fit into space before RAM slots. Therefore I removed the plastic cover from the cooling system of video card. Graphic card`s textolite board falls right between the RAM slot. First try...
  4. W

    Open Compute WindMill v2 Motherboard

    What about proper turn off the motherboard, and reboot, have any ideas?
  5. W

    Open Compute WindMill v2 Motherboard

    I have an old GeForce gts 250 with additional power connector, it`s about 150w tdp, and my power supply is Zalman 500 w, and that`s enought)
  6. W

    Open Compute WindMill v2 Motherboard

    Hi! I`m 3d artist too, I have the same node, it supports 2 cpus, if you want to save money and are willing to do with their hands, some non-standard solutions - buy, everything works fine. You can ask me questions.
  7. W

    Здравствуйте! Мы с вами переписывались насчет материнских плат пока свою плату Fujitsu...

    Здравствуйте! Мы с вами переписывались насчет материнских плат пока свою плату Fujitsu подключить не смог, но не сдаюсь заказал для нее недостающие детали, но также приобрел материнскую плату Quanta, видимо, такую же как у вас. Если вам не сложно, вы могли бы описать или сфотографировать...
  8. W

    Dell PowerEdge C8220 Build and Questions

    This will not affect the power button, I tried.
  9. W

    Dell PowerEdge C8220 Build and Questions

    Hi, Thomasz! I have read your message. I think I have the same problem. The difference is that the blue LED lights up for a short time when the power is turned off. Green LEDs are lit when the power is on. I decided to look for the cause of breakage. I will write to you, if I can find it.
  10. W

    Dell PowerEdge C8220 Build and Questions

    I could not find the part that burned, immediately felt the smell, but the next day the smell was gone. Power LEDs are lit but the power button does not light up can not turn on. As for motherboard Quanta, psi-e slots for connecting additional usb - there must be a connector mini psi-e. What...
  11. W

    Dell PowerEdge C8220 Build and Questions

    My motherboard is burnt ... very strange, when I decided to insert the card deeper into the slot PCI-E when the computer is running. Be careful! Now I want to try this motherboard QUANTA WINDMILL OPEN COMPUTE SYSTEM BOARD V1 WITH 10GbE ETHERNET HEATSINK
  12. W

    Dell PowerEdge C8220 Build and Questions

    The new computer is very productive for its price. For rendering in 3DS Max - Great.
  13. W

    Dell PowerEdge C8220 Build and Questions

    I have a lot of work. I'm already working at a new computer:) . I`ll try to help you to fix the problems later.
  14. W

    Dell PowerEdge C8220 Build and Questions

    Motherboard Name is Dell DCS7200S (information from AIDA64). You can to try your own jumper combination, I think. I tried different combinations at their own risk, nothing burned:) See my PDF below, this is voltage scheme.
  15. W

    Dell PowerEdge C8220 Build and Questions

    Yes, I reconfigured BIOS. In "Boot" tab turn "Force PXE Boot only" to "disable", change in "Boot Type Order" "Hard Disk" on the top. To determine the contact you want to close, I charted voltage pins. Then checked different combinations, by closing "+" and "ground". Multicore computer do I need...
  16. W

    Dell PowerEdge C8220 Build and Questions

    Has sent you a photo. I tried only one sata connector. Interesting to know for what you`ll need 16 core Computer.
  17. W

    Dell PowerEdge C8220 Build and Questions

    Oops!...I Did It Again Success! See my video Dropbox - success.mp4
  18. W

    Dell PowerEdge C8220 Build and Questions

    Сongratulations!!! Unfortunately, I do not have SATA panel like you. I will experiment with the integrated connectors.
  19. W

    Dell PowerEdge C8220 Build and Questions

    You can try to use external HDD with portable windows to try the system.